Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r274293M: Sat Nov  8 08:39:28 PST 2014
    root@sol:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (4000.08-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8192307200 (7812 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff80e61180, 0) error 19
random: live provider: "Intel Secure Key RNG"
netmap: loaded module
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xdfe00000-0xdfe3ffff irq 16 at device 0.0 on pci1
drmn0: <Pitcairn> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6810 0x1043:0x0464).
info: [drm] register mmio base: 0xDFE00000
info: [drm] register mmio size: 262144
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=6810
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_atrm_get_bios: Get ACPI handle for "ATRM"
info: [drm] radeon_atrm_get_bios: Failed to get "ATRM" handle: AE_NOT_FOUND
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xc0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800c0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
info: [drm] ATOM BIOS: 6810HB.15.41.0.1.AS04
drmn0: info: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
drmn0: info: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
info: [drm] Detected VRAM RAM=2048M, BAR=256M
info: [drm] RAM width 256bits DDR
[TTM] Zone  kernel: Available graphics memory: 4149126 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
info: [drm] radeon: 2048M of VRAM memory ready
info: [drm] radeon: 512M of GTT memory ready.
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] radeon: irq initialized.
info: [drm] GART: num cpu pages 131072, num gpu pages 131072
info: [drm] Loading PITCAIRN Microcode
info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
drmn0: info: WB enabled
drmn0: info: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x0xfffff8009d6ccc00
drmn0: info: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x0xfffff8009d6ccc04
drmn0: info: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0xfffff8009d6ccc08
drmn0: info: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x0xfffff8009d6ccc0c
drmn0: info: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x0xfffff8009d6ccc10
info: [drm] ring test on 0 succeeded in 4 usecs
info: [drm] ring test on 1 succeeded in 1 usecs
info: [drm] ring test on 2 succeeded in 1 usecs
info: [drm] ring test on 3 succeeded in 2 usecs
info: [drm] ring test on 4 succeeded in 1 usecs
info: [drm] ib test on ring 0 succeeded in 0 usecs
info: [drm] ib test on ring 1 succeeded in 0 usecs
info: [drm] ib test on ring 2 succeeded in 0 usecs
info: [drm] ib test on ring 3 succeeded in 0 usecs
info: [drm] ib test on ring 4 succeeded in 1 usecs
info: [drm] radeon_device_init: Taking over the fictitious range 0xc0000000-0xd0000000
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb1 addr 0x0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb2 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on iicbb3 addr 0x0
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb4 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on iicbb5 addr 0x0
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb6 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on iicbb7 addr 0x0
iic7: <I2C generic I/O> on iicbus7
info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm]   DP-1
info: [drm]   HPD4
info: [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
info: [drm]   Encoders:
info: [drm]     DFP1: INTERNAL_UNIPHY2
info: [drm] Connector 1:
info: [drm]   HDMI-A-1
info: [drm]   HPD5
info: [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
info: [drm]   Encoders:
info: [drm]     DFP2: INTERNAL_UNIPHY2
info: [drm] Connector 2:
info: [drm]   DVI-I-1
info: [drm]   HPD6
info: [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
info: [drm]   Encoders:
info: [drm]     DFP3: INTERNAL_UNIPHY
info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
info: [drm] Connector 3:
info: [drm]   DVI-D-1
info: [drm]   HPD1
info: [drm]   DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
info: [drm]   Encoders:
info: [drm]     DFP4: INTERNAL_UNIPHY1
info: [drm] Internal thermal controller with fan control
info: [drm] radeon: power management initialized
info: [drm] Connector DP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector DP-1 1920x1080@60Hz
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector HDMI-A-1 1920x1080@60Hz
info: [drm] Connector DVI-I-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DVI-I-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector DVI-I-1 1920x1080@60Hz
info: [drm] Connector DVI-D-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DVI-D-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector DVI-D-1 1920x1080@60Hz
info: [drm] fb mappable at 0xC114B000
info: [drm] vram apper at 0xC0000000
info: [drm] size 8294400
info: [drm] fb depth is 24
info: [drm]    pitch is 7680
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized radeon 2.29.0 20080528
vgapci0: Boot video device
hdac0: <ATI (0xaab0) HDA Controller> mem 0xdfe60000-0xdfe63fff irq 17 at device 0.1 on pci1
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdff20000-0xdff2ffff irq 21 at device 20.0 on pci0
xhci0: 32 byte context size.
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xf040-0xf05f mem 0xdff00000-0xdff1ffff,0xdff38000-0xdff38fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 10:c3:7b:6b:1c:e5
001.000014 [2700] netmap_attach             success for em0 tx 1/1024 rx 1/1024 queues/slots
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdff37000-0xdff373ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel (0x8ca0) HDA Controller> mem 0xdff30000-0xdff33fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xdff36000-0xdff363ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xdff35000-0xdff357ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
usbus0: 5.0Gbps Super Speed USB v3.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x470 offMax=0x6bc
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0
pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC892 (Internal Digital)> at nid 17 on hdaa0
pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.1: <Intel> at usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD20EZRX-00D8PB0 80.00A80> ATA-9 SATA 3.x device
ada0: Serial Number WD-WCC4M1527721
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD20EZRX-00D8PB0 80.00A80> ATA-9 SATA 3.x device
ada1: Serial Number WD-WCC4M1653632
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <Samsung SSD 850 PRO 128GB EXM01B6Q> ATA-9 SATA 3.x device
ada2: Serial Number S1SMNWAF726456W
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada2: quirks=0x1<4K>
ada2: Previously was known as ad8
random: unblocking device.
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
cd0 at ahcich3 bus 0 scbus3 target 0 lun 0
cd0: <ATAPI iHAS124   E 4L04> Removable CD-ROM SCSI-0 device 
cd0: Serial Number 3524665 2K8334505105
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Timecounter "TSC-low" frequency 2000039056 Hz quality 1000
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.3: <vendor 0x045e> at usbus1
ugen2.3: <Microsoft> at usbus2
ukbd0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 3> on usbus2
kbd2 at ukbd0
ugen2.4: <vendor 0x050d> at usbus2
Root mount waiting for: usbus2
ugen2.5: <Microsoft> at usbus2
ukbd1: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 5> on usbus2
kbd3 at ukbd1
Trying to mount root from zfs:zroot/ROOT/default []...
ums0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 3> on usbus2
ums0: 5 buttons and [XYZT] coordinates ID=26
ums0: 0 buttons and [T] coordinates ID=0
uhid0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 3> on usbus2
rsu0: <vendor 0x050d product 0x845a, class 0/0, rev 2.00/2.00, addr 4> on usbus2
rsu0: MAC/BB RTL8712 cut 3
uhid1: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 5> on usbus2
wlan0: Ethernet address: b4:75:0e:6c:c4:90
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 done
All buffers synced.
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r274334M: Wed Nov 12 21:40:04 PST 2014
    root@sol:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (4000.09-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8192327680 (7812 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff80e60180, 0) error 19
random: live provider: "Intel Secure Key RNG"
netmap: loaded module
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xdfe00000-0xdfe3ffff irq 16 at device 0.0 on pci1
drmn0: <Pitcairn> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6810 0x1043:0x0464).
info: [drm] register mmio base: 0xDFE00000
info: [drm] register mmio size: 262144
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=6810
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_atrm_get_bios: Get ACPI handle for "ATRM"
info: [drm] radeon_atrm_get_bios: Failed to get "ATRM" handle: AE_NOT_FOUND
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xc0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800c0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
info: [drm] ATOM BIOS: 6810HB.15.41.0.1.AS04
drmn0: info: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
drmn0: info: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
info: [drm] Detected VRAM RAM=2048M, BAR=256M
info: [drm] RAM width 256bits DDR
[TTM] Zone  kernel: Available graphics memory: 4149126 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
info: [drm] radeon: 2048M of VRAM memory ready
info: [drm] radeon: 512M of GTT memory ready.
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] radeon: irq initialized.
info: [drm] GART: num cpu pages 131072, num gpu pages 131072
info: [drm] Loading PITCAIRN Microcode
info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
drmn0: info: WB enabled
drmn0: info: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x0xfffff8009d6ccc00
drmn0: info: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x0xfffff8009d6ccc04
drmn0: info: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0xfffff8009d6ccc08
drmn0: info: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x0xfffff8009d6ccc0c
drmn0: info: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x0xfffff8009d6ccc10
info: [drm] ring test on 0 succeeded in 4 usecs
info: [drm] ring test on 1 succeeded in 1 usecs
info: [drm] ring test on 2 succeeded in 1 usecs
info: [drm] ring test on 3 succeeded in 2 usecs
info: [drm] ring test on 4 succeeded in 1 usecs
info: [drm] ib test on ring 0 succeeded in 0 usecs
info: [drm] ib test on ring 1 succeeded in 0 usecs
info: [drm] ib test on ring 2 succeeded in 0 usecs
info: [drm] ib test on ring 3 succeeded in 0 usecs
info: [drm] ib test on ring 4 succeeded in 1 usecs
info: [drm] radeon_device_init: Taking over the fictitious range 0xc0000000-0xd0000000
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb1 addr 0x0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb2 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on iicbb3 addr 0x0
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb4 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on iicbb5 addr 0x0
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb6 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on iicbb7 addr 0x0
iic7: <I2C generic I/O> on iicbus7
info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm]   DP-1
info: [drm]   HPD4
info: [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
info: [drm]   Encoders:
info: [drm]     DFP1: INTERNAL_UNIPHY2
info: [drm] Connector 1:
info: [drm]   HDMI-A-1
info: [drm]   HPD5
info: [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
info: [drm]   Encoders:
info: [drm]     DFP2: INTERNAL_UNIPHY2
info: [drm] Connector 2:
info: [drm]   DVI-I-1
info: [drm]   HPD6
info: [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
info: [drm]   Encoders:
info: [drm]     DFP3: INTERNAL_UNIPHY
info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
info: [drm] Connector 3:
info: [drm]   DVI-D-1
info: [drm]   HPD1
info: [drm]   DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
info: [drm]   Encoders:
info: [drm]     DFP4: INTERNAL_UNIPHY1
info: [drm] Internal thermal controller with fan control
info: [drm] radeon: power management initialized
info: [drm] Connector DP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector DP-1 1920x1080@60Hz
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector HDMI-A-1 1920x1080@60Hz
info: [drm] Connector DVI-I-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DVI-I-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector DVI-I-1 1920x1080@60Hz
info: [drm] Connector DVI-D-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DVI-D-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector DVI-D-1 1920x1080@60Hz
info: [drm] fb mappable at 0xC114B000
info: [drm] vram apper at 0xC0000000
info: [drm] size 8294400
info: [drm] fb depth is 24
info: [drm]    pitch is 7680
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized radeon 2.29.0 20080528
vgapci0: Boot video device
hdac0: <ATI (0xaab0) HDA Controller> mem 0xdfe60000-0xdfe63fff irq 17 at device 0.1 on pci1
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdff20000-0xdff2ffff irq 21 at device 20.0 on pci0
xhci0: 32 byte context size.
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xf040-0xf05f mem 0xdff00000-0xdff1ffff,0xdff38000-0xdff38fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 10:c3:7b:6b:1c:e5
001.000014 [2700] netmap_attach             success for em0 tx 1/1024 rx 1/1024 queues/slots
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdff37000-0xdff373ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel (0x8ca0) HDA Controller> mem 0xdff30000-0xdff33fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xdff36000-0xdff363ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xdff35000-0xdff357ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
usbus0: 5.0Gbps Super Speed USB v3.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x47c offMax=0x6b0
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0
pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC892 (Internal Digital)> at nid 17 on hdaa0
pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.1: <Intel> at usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD20EZRX-00D8PB0 80.00A80> ATA-9 SATA 3.x device
ada0: Serial Number WD-WCC4M1527721
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD20EZRX-00D8PB0 80.00A80> ATA-9 SATA 3.x device
ada1: Serial Number WD-WCC4M1653632
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <Samsung SSD 850 PRO 128GB EXM01B6Q> ATA-9 SATA 3.x device
ada2: Serial Number S1SMNWAF726456W
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada2: quirks=0x1<4K>
ada2: Previously was known as ad8
random: unblocking device.
SMP: AP CPU #1 Launched!
cd0 at ahcich3 bus 0 scbus3 target 0 lun 0
cd0: <ATAPI iHAS124   E 4L04> Removable CD-ROM SCSI-0 device 
cd0: Serial Number 3524665 2K8334505105
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC-low" frequency 2000043302 Hz quality 1000
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.3: <vendor 0x045e> at usbus1
ugen2.3: <Microsoft> at usbus2
ukbd0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 3> on usbus2
kbd2 at ukbd0
ugen2.4: <vendor 0x050d> at usbus2
Root mount waiting for: usbus2
ugen2.5: <Microsoft> at usbus2
ukbd1: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 5> on usbus2
kbd3 at ukbd1
Trying to mount root from zfs:zroot/ROOT/default []...
ums0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 3> on usbus2
ums0: 5 buttons and [XYZT] coordinates ID=26
ums0: 0 buttons and [T] coordinates ID=0
uhid0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 3> on usbus2
rsu0: <vendor 0x050d product 0x845a, class 0/0, rev 2.00/2.00, addr 4> on usbus2
rsu0: MAC/BB RTL8712 cut 3
uhid1: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 5> on usbus2
wlan0: Ethernet address: b4:75:0e:6c:c4:90
wlan0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 done
All buffers synced.
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r274337M: Wed Nov 12 21:45:07 PST 2014
    root@sol:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (4000.08-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8191807488 (7812 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device infrastructure driver
random: selecting highest priority adaptor <Dummy>
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff80e60180, 0) error 19
random: live provider: "Intel Secure Key RNG"
netmap: loaded module
random: SOFT: yarrow init()
random: selecting highest priority adaptor <Yarrow>
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1e> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xdfe00000-0xdfe3ffff irq 16 at device 0.0 on pci1
drmn0: <Pitcairn> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6810 0x1043:0x0464).
info: [drm] register mmio base: 0xDFE00000
info: [drm] register mmio size: 262144
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0, vendor=1002, device=6810
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_atrm_get_bios: Get ACPI handle for "ATRM"
info: [drm] radeon_atrm_get_bios: Failed to get "ATRM" handle: AE_NOT_FOUND
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xc0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800c0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
info: [drm] ATOM BIOS: 6810HB.15.41.0.1.AS04
drmn0: info: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
drmn0: info: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
info: [drm] Detected VRAM RAM=2048M, BAR=256M
info: [drm] RAM width 256bits DDR
[TTM] Zone  kernel: Available graphics memory: 4148870 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
info: [drm] radeon: 2048M of VRAM memory ready
info: [drm] radeon: 512M of GTT memory ready.
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] radeon: irq initialized.
info: [drm] GART: num cpu pages 131072, num gpu pages 131072
info: [drm] Loading PITCAIRN Microcode
info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
drmn0: info: WB enabled
drmn0: info: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x0xfffff8009d6ccc00
drmn0: info: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x0xfffff8009d6ccc04
drmn0: info: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x0xfffff8009d6ccc08
drmn0: info: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x0xfffff8009d6ccc0c
drmn0: info: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x0xfffff8009d6ccc10
info: [drm] ring test on 0 succeeded in 4 usecs
info: [drm] ring test on 1 succeeded in 1 usecs
info: [drm] ring test on 2 succeeded in 1 usecs
info: [drm] ring test on 3 succeeded in 2 usecs
info: [drm] ring test on 4 succeeded in 1 usecs
info: [drm] ib test on ring 0 succeeded in 0 usecs
info: [drm] ib test on ring 1 succeeded in 0 usecs
info: [drm] ib test on ring 2 succeeded in 0 usecs
info: [drm] ib test on ring 3 succeeded in 0 usecs
info: [drm] ib test on ring 4 succeeded in 1 usecs
info: [drm] radeon_device_init: Taking over the fictitious range 0xc0000000-0xd0000000
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb1 addr 0x0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb2 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on iicbb3 addr 0x0
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb4 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on iicbb5 addr 0x0
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb6 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on iicbb7 addr 0x0
iic7: <I2C generic I/O> on iicbus7
info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm]   DP-1
info: [drm]   HPD4
info: [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
info: [drm]   Encoders:
info: [drm]     DFP1: INTERNAL_UNIPHY2
info: [drm] Connector 1:
info: [drm]   HDMI-A-1
info: [drm]   HPD5
info: [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
info: [drm]   Encoders:
info: [drm]     DFP2: INTERNAL_UNIPHY2
info: [drm] Connector 2:
info: [drm]   DVI-I-1
info: [drm]   HPD6
info: [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
info: [drm]   Encoders:
info: [drm]     DFP3: INTERNAL_UNIPHY
info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
info: [drm] Connector 3:
info: [drm]   DVI-D-1
info: [drm]   HPD1
info: [drm]   DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
info: [drm]   Encoders:
info: [drm]     DFP4: INTERNAL_UNIPHY1
info: [drm] Internal thermal controller with fan control
info: [drm] radeon: power management initialized
info: [drm] Connector DP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector DP-1 1920x1080@60Hz
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector HDMI-A-1 1920x1080@60Hz
info: [drm] Connector DVI-I-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DVI-I-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector DVI-I-1 1920x1080@60Hz
info: [drm] Connector DVI-D-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DVI-D-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] cmdline mode for connector DVI-D-1 1920x1080@60Hz
info: [drm] fb mappable at 0xC114B000
info: [drm] vram apper at 0xC0000000
info: [drm] size 8294400
info: [drm] fb depth is 24
info: [drm]    pitch is 7680
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized radeon 2.29.0 20080528
vgapci0: Boot video device
hdac0: <ATI (0xaab0) HDA Controller> mem 0xdfe60000-0xdfe63fff irq 17 at device 0.1 on pci1
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdff20000-0xdff2ffff irq 21 at device 20.0 on pci0
xhci0: 32 byte context size.
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xf040-0xf05f mem 0xdff00000-0xdff1ffff,0xdff38000-0xdff38fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 10:c3:7b:6b:1c:e5
001.000014 [2700] netmap_attach             success for em0 tx 1/1024 rx 1/1024 queues/slots
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdff37000-0xdff373ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel (0x8ca0) HDA Controller> mem 0xdff30000-0xdff33fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xdff36000-0xdff363ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xdff35000-0xdff357ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
usbus0: 5.0Gbps Super Speed USB v3.0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x47c offMax=0x71c
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC892 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0
pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC892 (Internal Digital)> at nid 17 on hdaa0
pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.1: <Intel> at usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD20EZRX-00D8PB0 80.00A80> ATA-9 SATA 3.x device
ada0: Serial Number WD-WCC4M1527721
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD20EZRX-00D8PB0 80.00A80> ATA-9 SATA 3.x device
ada1: Serial Number WD-WCC4M1653632
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <Samsung SSD 850 PRO 128GB EXM01B6Q> ATA-9 SATA 3.x device
ada2: Serial Number S1SMNWAF726456W
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada2: quirks=0x1<4K>
ada2: Previously was known as ad8
random: unblocking device.
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
cd0 at ahcich3 bus 0 scbus3 target 0 lun 0
cd0: <ATAPI iHAS124   E 4L04> Removable CD-ROM SCSI-0 device 
cd0: Serial Number 3524665 2K8334505105
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #5 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 2000040880 Hz quality 1000
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.3: <vendor 0x045e> at usbus1
ugen2.3: <Microsoft> at usbus2
ukbd0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 3> on usbus2
kbd2 at ukbd0
ugen2.4: <vendor 0x050d> at usbus2
Root mount waiting for: usbus2
ugen2.5: <Microsoft> at usbus2
ukbd1: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 5> on usbus2
kbd3 at ukbd1
Trying to mount root from zfs:zroot/ROOT/default []...
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
Solaris: WARNING: can't open objset for archive/oldmac
Solaris: WARNING: can't open objset for archive/archive
Solaris: WARNING: can't open objset for archive/pics
Solaris: WARNING: can't open objset for archive/music
Solaris: WARNING: can't open objset for archive/Win7
Solaris: WARNING: can't open objset for archive/win98
Solaris: WARNING: can't open objset for archive
ums0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 3> on usbus2
ums0: 5 buttons and [XYZT] coordinates ID=26
ums0: 0 buttons and [T] coordinates ID=0
uhid0: <Microsoft Microsoft Nano Transceiver v1.0, class 0/0, rev 2.00/7.04, addr 3> on usbus2
rsu0: <vendor 0x050d product 0x845a, class 0/0, rev 2.00/2.00, addr 4> on usbus2
rsu0: MAC/BB RTL8712 cut 3
uhid1: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 5> on usbus2
wlan0: Ethernet address: b4:75:0e:6c:c4:90