Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-BETA2 #0 r285646: Fri Jul 17 01:09:28 UTC 2015
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "efifb".
CPU: Intel(R) Core(TM) i3-4030U CPU @ 1.90GHz (1895.66-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x40651  Family=0x6  Model=0x45  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 4821352448 (4598 MB)
avail memory = 4030382080 (3843 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-J3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-39 on motherboard
random: <Software, Yarrow> initialized
module_register_init: MOD_LOAD (vesa, 0xffffffff80db9220, 0) error 19
kbd1 at kbdmux0
acpi0: <LENOVO TP-J3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf0710000-0xf0713fff at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf0700000-0xf070ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf0714000-0xf0717fff at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf0604000-0xf0604fff,0xf0600000-0xf0603fff at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x50800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: f0:76:1c:04:33:26
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib3
pci4: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib4
pci5: <unknown> at device 0.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf071d000-0xf071d3ff at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x4088-0x408f,0x4094-0x4097,0x4080-0x4087,0x4090-0x4093,0x4060-0x407f mem 0xf071c000-0xf071c7ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Conexant (0x510f) HDA CODEC> at cad 0 on hdac1
hdaa1: <Conexant (0x510f) Audio Function Group> at nid 1 on hdacc1
pcm1: <Conexant (0x510f) (Analog)> at nid 23 and 26 on hdaa1
pcm2: <Conexant (0x510f) (Front Analog)> at nid 22 and 25 on hdaa1
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG MZ7TE128HMGR-000L1 EXT06L0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S1GFNSBFA13636
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1895656440 Hz quality 1000
Root mount waiting for: usbus1 usbus0
uhub0: 13 ports with 13 removable, self powered
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen0.2: <Kingston> at usbus0
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 1> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:1:0:-1: Attached to scbus1
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI device
da0: Serial Number 5B7618B4DFDD
da0: 40.000MB/s transfers
da0: 3936MB (8060928 512 byte sectors: 255H 63S/T 501C)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
uhub2: 8 ports with 8 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
ugen0.3: <Unknown> at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
ugen0.3: <Vimicro corp.> at usbus0
Root mount waiting for: usbus0
ugen0.4: <vendor 0x138a> at usbus0
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)
ACPI Exception: AE_BAD_ADDRESS, Returned by Handler for [EmbeddedControl] (20150515/evregion-312)
ACPI Error: Method parse/execution failed [\134_TZ_.TZ01._TMP] (Node 0xfffff80002b0a9c0), AE_BAD_ADDRESS (20150515/psparse-552)