Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #10 b1abdb4(master)-dirty: Wed Mar  2 12:46:33 PST 2016
    root@PC1-13-0006:/usr/obj/usr/home/mirama/dev/freebsd/sys/NOSTATICUSBKBD amd64
FreeBSD clang version 3.7.1 (tags/RELEASE_371/final 255217) 20151225
VT(efifb): resolution 1366x768
CPU: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (1696.19-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3986575360 (3801 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <APPLE  Apple00>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
random: unblocking device.
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
kbd0 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80b20700, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
cryptosoft0: <software crypto> on motherboard
acpi0: <APPLE Apple00> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x2000-0x203f mem 0xa0000000-0xa03fffff,0x90000000-0x9fffffff at device 2.0 on pci0
agp0: <IvyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xa0600000-0xa060ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xa0616c00-0xa0616fff at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xa0610000-0xa0613fff at device 27.0 on pci0
pcib1: <PCI-PCI bridge> at device 28.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xa0616800-0xa0616bff at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x2088-0x208f,0x209c-0x209f,0x2080-0x2087,0x2098-0x209b,0x2060-0x207f mem 0xa0616000-0xa06167ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
uart0: <8250 or 16450 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
usbus0: 5.0Gbps Super Speed USB v3.0
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
hdacc0: <Cirrus Logic CS4206 HDA CODEC> at cad 0 on hdac0
hdaa0: <Cirrus Logic CS4206 Audio Function Group> at nid 1 on hdacc0
pcm0: <Cirrus Logic CS4206 (Internal Analog)> at nid 11 and 13 on hdaa0
pcm1: <Cirrus Logic CS4206 (Analog Headphones)> at nid 9 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association.
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (7) in association 1! Disabling association.
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <APPLE SSD TS128E TQAABBF0> ATA8-ACS SATA 3.x device
ada0: Serial Number 82BS10RVT06Y
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 115712MB (236978176 512 byte sectors)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1696187053 Hz quality 1000
Trying to mount root from ufs:/dev/ada0p8 [rw]...
uhub0: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x05ac> at usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub3: 6 ports with 5 removable, self powered
uhub4: 8 ports with 7 removable, self powered
ugen1.3: <Apple Inc.> at usbus1
axe0: <vendor 0x05ac product 0x1402, rev 2.00/0.01, addr 1> on usbus0
ugen2.3: <vendor 0x0424> at usbus2
uhub5: <vendor 0x0424 product 0x2512, class 9/0, rev 2.00/b.b3, addr 3> on usbus2
uhub5: MTT enabled
uhub5: 2 ports with 0 removable, self powered
miibus0: <MII bus> on axe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on axe0
ue0: Ethernet address: 28:37:37:01:2e:32
ue0: link state changed to DOWN
ugen2.4: <Apple Inc.> at usbus2
uhub6: <Apple Inc. BRCM20702 Hub, class 9/0, rev 2.00/1.00, addr 4> on usbus2
uhub6: 3 ports with 0 removable, self powered
ugen2.5: <vendor 0x05ac> at usbus2
ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 5> on usbus2
ugen2.6: <vendor 0x05ac> at usbus2
ue0: link state changed to UP
ugen2.7: <Apple Inc.> at usbus2
ugen2.8: <Apple Inc.> at usbus2
ukbd1: <Apple Internal Keyboard> on usbus2
ums0: <Touchpad> on usbus2
ums0: 3 buttons and [XY] coordinates ID=2
ums1: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 6> on usbus2
ums1: 3 buttons and [XY] coordinates ID=2
ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/1.25, addr 7> on usbus2
wsp0: <Touchpad> on usbus2
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ugen2.5: <vendor 0x05ac> at usbus2 (disconnected)
ukbd0: at uhub6, port 1, addr 5 (disconnected)
ugen2.6: <vendor 0x05ac> at usbus2 (disconnected)
ums1: at uhub6, port 2, addr 6 (disconnected)
acpi_video0: <ACPI video extension> on vgapci0
info: [drm] Initialized drm 1.1.0 20060810
[drm:pid898:drm_probe_helper] drmn0 desc: Intel IvyBridge (M)
drmn0: <Intel IvyBridge (M)> on vgapci0
[drm:pid898:drm_get_pci_dev] 
[drm:pid898:drm_ctxbitmap_next] bit : 0
[drm:pid898:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
[drm:pid898:drm_get_minor] 
[drm:pid898:drm_get_minor] new minor assigned 64
[drm:pid898:drm_get_minor] 
[drm:pid898:drm_get_minor] new minor assigned 0
[drm:pid898:drm_addmap_core] offset = 0xa0000000, size = 0x00400000, type = 1
[drm:pid898:intel_setup_mchbar] mchbar already enabled
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0x0
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0x0
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0x0
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
[drm:pid898:intel_opregion_setup] graphic opregion physical addr: 0x8ad13190
[drm:pid898:intel_opregion_setup] Public ACPI methods supported
[drm:pid898:intel_opregion_setup] SWSCI supported
[drm:pid898:intel_opregion_setup] ASLE supported
[drm:pid898:drm_pci_enable_msi] MSI count = 1
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
[drm:KMS:pid898:intel_detect_pch] Found PatherPoint PCH
[drm:KMS:pid898:init_vbt_defaults] Set default to SSC at 100MHz
[drm:KMS:pid898:intel_parse_bios] Using VBT from OpRegion: $VBT SNB/IVB-MOBILE d
[drm:KMS:pid898:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0
[drm:KMS:pid898:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:KMS:pid898:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:KMS:pid898:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[drm:KMS:pid898:parse_lfp_panel_data] VBT initial LVDS value 300
[drm:KMS:pid898:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:KMS:pid898:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:KMS:pid898:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[drm:KMS:pid898:intel_init_pm] Using MT version of forcewake
[drm:KMS:pid898:intel_modeset_init] 3 display pipes available.
[drm:KMS:pid898:intel_dp_init] cur t1_t3 125 t8 2100 t9 2500 t10 740 t11_t12 6000
[drm:KMS:pid898:intel_dp_init] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[drm:KMS:pid898:intel_dp_init] panel power up delay 200, power down delay 74, power cycle delay 600
[drm:KMS:pid898:intel_dp_init] backlight on delay 210, off delay 250
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0xc0000008 PCH_PP_CONTROL: 0xabcd000f
[drm:KMS:pid898:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid898:intel_dp_i2c_init] i2c_init DPDDC-A
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] eDP VDD already on
[drm:KMS:pid898:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid898:intel_panel_get_backlight] get backlight PWM = 1808
[drm:KMS:pid898:intel_crt_init] pch crt adpa set to 0xf40000
[drm:KMS:pid898:intel_setup_outputs] HDMIB 1 PCH_DP_B 1 HDMIC 1 HDMID 0 PCH_DP_C 1 PCH_DP_D 0 LVDS 0
[drm:KMS:pid898:intel_sdvo_read_byte] i2c transfer returned 2
[drm:KMS:pid898:intel_sdvo_init] No SDVO device found on SDVOB
[drm:KMS:pid898:intel_dp_i2c_init] i2c_init DPDDC-B
[drm:KMS:pid898:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid898:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid898:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid898:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid898:intel_dp_i2c_init] i2c_init DPDDC-C
[drm:KMS:pid898:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid898:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid898:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid898:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid898:ironlake_edp_backlight_off] 
[drm:KMS:pid898:ironlake_edp_panel_off] Turn eDP power off
[drm:KMS:pid898:ironlake_panel_vdd_off_sync] PCH_PP_STATUS: 0xc0000008 PCH_PP_CONTROL: 0xabcd0003
[drm:KMS:pid898:ironlake_wait_panel_off] Wait for panel power off time
[drm:KMS:pid898:ironlake_wait_panel_status] mask b000000f value 00000000 status e0000003 control abcd0000
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid898:ironlake_wait_panel_power_cycle] Wait for panel power cycle
[drm:KMS:pid898:ironlake_wait_panel_status] mask b800000f value 00000000 status 40000000 control abcd0000
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x40000000 PCH_PP_CONTROL: 0xabcd0008
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] eDP was not running
[drm:KMS:pid898:intel_dp_link_down] 
[drm:KMS:pid898:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid898:ironlake_crtc_dpms] crtc 0/0 dpms off
[drm:KMS:pid898:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
[drm:KMS:pid898:gm45_get_vblank_counter] trying to get vblank count for disabled pipe A
[drm:KMS:pid898:intel_update_fbc] 
[drm:KMS:pid898:ironlake_crtc_dpms] crtc 1/1 dpms off
[drm:KMS:pid898:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
[drm:KMS:pid898:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
[drm:KMS:pid898:intel_update_fbc] 
[drm:KMS:pid898:ironlake_crtc_dpms] crtc 2/2 dpms off
[drm:KMS:pid898:ironlake_wait_for_vblank] vblank wait timed out
[drm:KMS:pid898:intel_wait_for_pipe_off] pipe_off wait timed out
[drm:KMS:pid898:intel_update_fbc] 
[drm:KMS:pid898:ironlake_init_pch_refclk] has_panel 1 has_lvds 0 has_pch_edp 0 has_cpu_edp 1 has_ck505 0
drmn0: taking over the fictitious range 0x90000000-0xa0000000
[drm:KMS:pid898:init_status_page] render ring hws offset: 0x00000000
[drm:KMS:pid898:init_status_page] bsd ring hws offset: 0x00022000
[drm:KMS:pid898:init_status_page] blitter ring hws offset: 0x00043000
[drm:KMS:pid898:create_default_context] Default HW context loaded
[drm:KMS:pid898:i915_gem_context_init] HW context support initialized
info: [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on
[drm:pid898:drm_irq_install] irq=267
[drm:KMS:pid898:ironlake_edp_backlight_off] 
[drm:KMS:pid898:ironlake_edp_panel_off] Turn eDP power off
[drm:KMS:pid898:ironlake_panel_vdd_off_sync] PCH_PP_STATUS: 0x40000000 PCH_PP_CONTROL: 0xabcd0000
[drm:KMS:pid898:ironlake_wait_panel_off] Wait for panel power off time
[drm:KMS:pid898:ironlake_wait_panel_status] mask b000000f value 00000000 status 40000000 control abcd0000
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid898:ironlake_wait_panel_power_cycle] Wait for panel power cycle
[drm:KMS:pid898:ironlake_wait_panel_status] mask b800000f value 00000000 status 40000000 control abcd0000
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x40000000 PCH_PP_CONTROL: 0xabcd0008
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] eDP was not running
[drm:KMS:pid898:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
info: [drm] Connector eDP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.eDP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.VGA-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-2
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-2: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-2
info: [drm]   - kern.vt.fb.default_mode
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:9:eDP-1]
[drm:KMS:pid898:intel_dp_probe_oui] Sink OUI: 0010fa
[drm:KMS:pid898:intel_dp_probe_oui] Branch OUI: 000000
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] eDP VDD already on
[drm:KMS:pid898:iic_dp_aux_xfer] dp_aux_xfer return 0
[drm:KMS:pid898:iic_dp_aux_xfer] dp_aux_xfer return 0
[drm:KMS:pid898:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid898:ironlake_edp_panel_vdd_on] eDP VDD already on
[drm:KMS:pid898:iic_dp_aux_xfer] dp_aux_xfer return 0
[drm:KMS:pid898:iic_dp_aux_xfer] dp_aux_xfer return 0
[drm:KMS:pid898:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid898:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:9:eDP-1] probed modes :
[drm:KMS:pid898:drm_mode_debug_printmodeline] Modeline 24:"1366x768" 60 72000 1366 1380 1436 1500 768 769 772 800 0x48 0xa
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1]
[drm:KMS:pid898:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
[drm:KMS:pid898:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[drm:KMS:pid898:intel_crt_detect] CRT not detected via hotplug
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:13:VGA-1] disconnected
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-1]
[drm:KMS:pid898:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 2
[drm:KMS:pid898:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 2
[drm:KMS:pid898:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 2
[drm:KMS:pid898:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 2
[drm:KMS:pid898:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 2
[drm:KMS:pid898:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-1] got no edid, ddc port 5
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:16:HDMI-A-1] disconnected
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1]
[drm:KMS:pid898:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid898:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid898:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:17:DP-1] disconnected
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:20:HDMI-A-2]
[drm:KMS:pid898:gmbus_xfer] GMBUS [gmbus dpc] NAK for addr: 00a0 r(1)
[drm:KMS:pid898:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6
[drm:KMS:pid898:gmbus_xfer] GMBUS [gmbus dpc] NAK for addr: 00a0 r(1)
[drm:KMS:pid898:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6
[drm:KMS:pid898:gmbus_xfer] GMBUS [gmbus dpc] NAK for addr: 00a0 r(1)
[drm:KMS:pid898:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6
[drm:KMS:pid898:gmbus_xfer] GMBUS [gmbus dpc] NAK for addr: 00a0 r(1)
[drm:KMS:pid898:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6
[drm:KMS:pid898:gmbus_xfer] GMBUS [gmbus dpc] NAK for addr: 00a0 r(1)
[drm:KMS:pid898:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6
[drm:KMS:pid898:intel_hdmi_detect] [CONNECTOR:20:HDMI-A-2] got no edid, ddc port 4
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:20:HDMI-A-2] disconnected
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2]
[drm:KMS:pid898:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid898:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid898:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid898:drm_helper_probe_single_connector_modes] [CONNECTOR:21:DP-2] disconnected
[drm:KMS:pid898:drm_setup_crtcs] 
[drm:KMS:pid898:drm_enable_connectors] connector 9 enabled? yes
[drm:KMS:pid898:drm_enable_connectors] connector 13 enabled? no
[drm:KMS:pid898:drm_enable_connectors] connector 16 enabled? no
[drm:KMS:pid898:drm_enable_connectors] connector 17 enabled? no
[drm:KMS:pid898:drm_enable_connectors] connector 20 enabled? no
[drm:KMS:pid898:drm_enable_connectors] connector 21 enabled? no
[drm:KMS:pid898:drm_target_preferred] looking for cmdline mode on connector 9
[drm:KMS:pid898:drm_target_preferred] looking for preferred mode on connector 9
[drm:KMS:pid898:drm_target_preferred] found mode 1366x768
[drm:KMS:pid898:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[drm:KMS:pid898:drm_setup_crtcs] desired mode 1366x768 set on crtc 3
[drm:KMS:pid898:intelfb_create] allocated 1366x768 (s 24bits) fb: 0x00073000, bo 0xfffff8010631d000
fbd0 on drmn0
VT: Replacing driver "efifb" with new "fb".
[drm:KMS:pid0:drm_crtc_helper_set_config] 
[drm:KMS:pid0:drm_crtc_helper_set_config] [CRTC:3] [FB:27] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:drm_crtc_helper_set_config] crtc has no fb, full mode set
[drm:KMS:pid0:drm_crtc_helper_set_config] modes are different, full mode set
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 26:"1366x768" 60 72000 1366 1380 1436 1500 768 769 772 800 0x48 0xa
[drm:KMS:pid0:drm_crtc_helper_set_config] encoder changed, full mode switch
[drm:KMS:pid0:drm_crtc_helper_set_config] crtc changed, full mode switch
[drm:KMS:pid0:drm_crtc_helper_set_config] [CONNECTOR:9:eDP-1] to [CRTC:3]
[drm:KMS:pid0:drm_crtc_helper_set_config] attempting to set mode from userspace
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 26:"1366x768" 60 72000 1366 1380 1436 1500 768 769 772 800 0x48 0xa
[drm:KMS:pid0:intel_dp_mode_fixup] DP link computation with max lane count 1 max bw 0a pixel clock 72000KHz
[drm:KMS:pid0:intel_dp_mode_fixup] DP link bw 0a lane count 1 clock 270000 bpp 24
[drm:KMS:pid0:intel_dp_mode_fixup] DP link bw required 172800 available 216000
[drm:KMS:pid0:drm_crtc_helper_set_mode] [CRTC:3]
[drm:KMS:pid0:ironlake_edp_backlight_off] 
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
[drm:KMS:pid0:ironlake_edp_panel_off] Turn eDP power off
[drm:KMS:pid0:ironlake_panel_vdd_off_sync] PCH_PP_STATUS: 0x40000000 PCH_PP_CONTROL: 0xabcd0000
[drm:KMS:pid0:ironlake_wait_panel_off] Wait for panel power off time
[drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 00000000 status 40000000 control abcd0000
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle
[drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 40000000 control abcd0000
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x40000000 PCH_PP_CONTROL: 0xabcd0008
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP was not running
[drm:KMS:pid0:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:pid0:drm_vblank_get] enabling vblank on crtc 0, ret: -22
[drm:KMS:pid0:intel_choose_pipe_bpp_dither] clamping display bpc (was -1) to eDP (6)
[drm:KMS:pid0:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 6)
[drm:KMS:pid0:ironlake_crtc_mode_set] Mode for pipe 0:
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 26:"1366x768" 60 72000 1366 1380 1436 1500 768 769 772 800 0x48 0xa
[drm:KMS:pid0:ironlake_set_pll_edp] eDP PLL enable for clock 270000
[drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:ironlake_update_plane] Writing base 00073000 00000000 0 0 5504
[drm:KMS:pid0:intel_update_fbc] 
[drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 1: display plane 11, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 2: display plane 38, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 3: display plane 74, fbc lines 3, cursor 6
[drm:KMS:pid0:drm_crtc_helper_set_mode] [ENCODER:10:TMDS-10] set [MODE:26:1366x768]
[drm:KMS:pid0:ironlake_edp_pll_on] 
[drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 8, cursor: 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 1: display plane 11, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 2: display plane 38, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 3: display plane 74, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:intel_update_fbc] 
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on
[drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP VDD already on
[drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:intel_dp_start_link_train] too many full retries, give up
[drm:KMS:pid0:ironlake_edp_panel_on] Turn eDP power on
[drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle
[drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 40000000 control abcd0008
[drm:KMS:pid0:ironlake_wait_panel_on] Wait for panel power on
[drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 80000008 status 4000000a control abcd000b
[drm:KMS:pid0:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1
[drm:KMS:pid0:ironlake_panel_vdd_off_sync] PCH_PP_STATUS: 0xc0000008 PCH_PP_CONTROL: 0xabcd0003
[drm:KMS:pid0:intel_dp_link_down] 
[drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:intel_dp_start_link_train] clock recovery OK
[drm:pid12:intel_prepare_page_flip] preparing flip with no unpin work?
[drm:KMS:pid0:ironlake_edp_backlight_on] 
[drm:pid0:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 1500, vtotal 800, vdisplay 768
[drm:pid0:drm_calc_timestamping_constants] crtc 3: clock 270000 kHz framedur 4444000 linedur 5555, pixeldur 3
[drm:KMS:pid0:drm_crtc_helper_set_config] Setting connector DPMS state to on
[drm:KMS:pid0:drm_crtc_helper_set_config] 	[CONNECTOR:9:eDP-1] set DPMS on
[drm:KMS:pid0:drm_crtc_helper_set_config] 
[drm:KMS:pid0:drm_crtc_helper_set_config] [CRTC:5] [NOFB]
[drm:KMS:pid0:drm_crtc_helper_set_config] 
[drm:KMS:pid0:drm_crtc_helper_set_config] [CRTC:7] [NOFB]