Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.3-RELEASE #0 r297264: Fri Mar 25 02:10:02 UTC 2016 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz (2000.11-MHz K8-class CPU) Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11 Features=0xbfebfbff Features2=0x4e33d AMD Features=0x20000800 AMD Features2=0x1 VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16588001280 (15819 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 2 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 random: initialized ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: Power Button (fixed) cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 cpu4: on acpi0 cpu5: on acpi0 cpu6: on acpi0 cpu7: on acpi0 atrtc0: port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 2.0 on pci0 pci1: on pcib1 pcib2: irq 16 at device 0.0 on pci1 pci2: on pcib2 pcib3: irq 16 at device 0.0 on pci2 pci3: on pcib3 pcib4: irq 17 at device 1.0 on pci2 pci4: on pcib4 pcib5: irq 18 at device 2.0 on pci2 pci5: on pcib5 em0: port 0x2000-0x201f mem 0xd8220000-0xd823ffff,0xd8200000-0xd821ffff irq 18 at device 0.0 on pci5 em0: Using an MSI interrupt em0: Ethernet address: 00:30:48:c3:22:a8 em1: port 0x2020-0x203f mem 0xd8260000-0xd827ffff,0xd8240000-0xd825ffff irq 19 at device 0.1 on pci5 em1: Using an MSI interrupt em1: Ethernet address: 00:30:48:c3:22:a9 pcib6: at device 0.3 on pci1 pci6: on pcib6 pcib7: at device 4.0 on pci0 pci7: on pcib7 pci7: at device 0.0 (no driver attached) pcib8: at device 6.0 on pci0 pci8: on pcib8 pcib9: at device 0.0 on pci8 pci9: on pcib9 mpt0: port 0x3000-0x30ff mem 0xd8410000-0xd8413fff,0xd8400000-0xd840ffff irq 19 at device 1.0 on pci9 mpt0: MPI Version=1.5.13.0 pcib10: at device 0.2 on pci8 pci10: on pcib10 uhci0: port 0x1800-0x181f irq 17 at device 29.0 on pci0 usbus0 on uhci0 uhci1: port 0x1820-0x183f irq 19 at device 29.1 on pci0 usbus1 on uhci1 uhci2: port 0x1840-0x185f irq 18 at device 29.2 on pci0 usbus2 on uhci2 ehci0: mem 0xd8600400-0xd86007ff irq 17 at device 29.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 pcib11: at device 30.0 on pci0 pci11: on pcib11 vgapci0: port 0x4000-0x40ff mem 0xd0000000-0xd7ffffff,0xd8500000-0xd850ffff irq 18 at device 1.0 on pci11 vgapci0: Boot video device isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 ata0: at channel 0 on atapci0 acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: at iomem 0xc0000-0xcafff,0xcb000-0xd0fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 random: unblocking device. ugen2.1: at usbus2 ugen0.1: at usbus0 uhub0: on usbus2 uhub1: on usbus0 ugen1.1: at usbus1 ugen3.1: at usbus3 uhub2: on usbus1 uhub3: on usbus3 ada0 at ata0 bus 0 scbus1 target 0 lun 0 ada0: ATA device ada0: Serial Number DOM5F00008643 ada0: 16.700MB/s transfers (WDMA2, PIO 512bytes) ada0: 31MB (64000 512 byte sectors) ada0: Previously was known as ad0 ses0 at mpt0 bus 0 scbus0 target 12 lun 0 ses0: Fixed Enclosure Services SCSI-3 device ses0: 300.000MB/s transfers ses0: SCSI-3 ENC Device da0 at mpt0 bus 0 scbus0 target 0 lun 0 da0: Fixed Direct Access SPC-3 SCSI device da0: Serial Number WD-WCC3F0YPZL4L da0: 300.000MB/s transfers da1 at mpt0 bus 0 scbus0 target 1 lun 0 da0: Command Queueing enabled da1: da0: 953869MB (1953525168 512 byte sectors) Fixed Direct Access SPC-3 SCSI device da1: Serial Number WD-WCC3F0YPZ07J da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 953869MB (1953525168 512 byte sectors) da2 at mpt0 bus 0 scbus0 target 2 lun 0 da2: Fixed Direct Access SPC-3 SCSI device da3 at mpt0 bus 0 scbus0 target 3 lun 0 da2: Serial Number WD-WCC3F3FRV2LP da3: da2: 300.000MB/s transfers Fixed Direct Access SPC-3 SCSI device da3: Serial Number WD-WCC3F3FRV62A da2: Command Queueing enabled da2: 953869MB (1953525168 512 byte sectors) da3: 300.000MB/s transfers da3: Command Queueing enabled da3: 953869MB (1953525168 512 byte sectors) da4 at mpt0 bus 0 scbus0 target 4 lun 0 da4: Fixed Direct Access SPC-3 SCSI device da4: Serial Number WD-WCC3F1ZAV4N0 da4: 300.000MB/s transfers da5 at mpt0 bus 0 scbus0 target 5 lun 0 da4: Command Queueing enabled da5: da4: 953869MB (1953525168 512 byte sectors) Fixed Direct Access SPC-3 SCSI device da5: Serial Number WD-WCC3F1ZAVFP9 da5: 300.000MB/s transfers da5: Command Queueing enabled da5: 953869MB (1953525168 512 byte sectors) da6 at mpt0 bus 0 scbus0 target 6 lun 0 da6: Fixed Direct Access SPC-3 SCSI device da6: Serial Number WD-WCC3F0YPZ5YE da6: 300.000MB/s transfers da6: Command Queueing enabled da6: 953869MB (1953525168 512 byte sectors) da7 at mpt0 bus 0 scbus0 target 7 lun 0 da7: Fixed Direct Access SPC-3 SCSI device da7: Serial Number WD-WCC3F1ZAVY4D da7: 300.000MB/s transfersda8 at mpt0 bus 0 scbus0 target 8 lun 0 da7: Command Queueing enabled da8: da7: 953869MB (1953525168 512 byte sectors) Fixed Direct Access SPC-3 SCSI device da8: Serial Number WD-WCC3F0YPZ2UV da8: 300.000MB/s transfers da8: Command Queueing enabled da8: 953869MB (1953525168 512 byte sectors) da9 at mpt0 bus 0 scbus0 target 9 lun 0 da9: Fixed Direct Access SPC-3 SCSI device da9: Serial Number WD-WCC3F4ZJCLF2 da10 at mpt0 bus 0 scbus0 target 10 lun 0 da9: 300.000MB/s transfersda10: da9: Command Queueing enabled Fixed Direct Access SPC-3 SCSI device da9: 953869MB (1953525168 512 byte sectors) da10: Serial Number WD-WCC3F3FRVCRS da10: 300.000MB/s transfers da10: Command Queueing enabled da10: 953869MB (1953525168 512 byte sectors) da11 at mpt0 bus 0 scbus0 target 11 lun 0 da11: Fixed Direct Access SPC-3 SCSI device da11: Serial Number WD-WCC3F1ZAVUV3 da11: 300.000MB/s transfers da11: Command Queueing enabled da11: 953869MB (1953525168 512 byte sectors) SMP: AP CPU #5 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #4 Launched! Timecounter "TSC" frequency 2000112372 Hz quality 1000 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 Root mount waiting for: usbus3 uhub3: 6 ports with 6 removable, self powered Trying to mount root from zfs:zcool/ROOT/default []... ugen0.2: at usbus0 ukbd0: on usbus0 kbd2 at ukbd0 em0: link state changed to UP uhid0: on usbus0 ses0: da0,pass0: Element descriptor: 'SLOT 017' ses0: da0,pass0: SAS Device Slot Element: 1 Phys ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( STP ) ses0: phy 0: parent 500151b00007c1a8 addr 500151b00007c1be ses0: da1,pass1: Element descriptor: 'SLOT 019' ses0: da1,pass1: SAS Device Slot Element: 1 Phys ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( STP ) ses0: phy 0: parent 500151b00007c1a8 addr 500151b00007c1c0 ses0: da2,pass2: Element descriptor: 'SLOT 021' ses0: da2,pass2: SAS Device Slot Element: 1 Phys ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( STP ) ses0: phy 0: parent 500151b00007c1a8 addr 500151b00007c1c2 ses0: da3,pass3: Element descriptor: 'SLOT 023' ses0: da3,pass3: SAS Device Slot Element: 1 Phys ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( STP ) ses0: phy 0: parent 500151b00007c1a8 addr 500151b00007c1c4 ses0: da4,pass4: Element descriptor: 'SLOT 024' ses0: da4,pass4: SAS Device Slot Element: 1 Phys ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( STP ) ses0: phy 0: parent 500151b00007c1a8 addr 500151b00007c1c5 ses0: da5,pass5: Element descriptor: 'SLOT 025' ses0: da5,pass5: SAS Device Slot Element: 1 Phys ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( STP ) ses0: phy 0: parent 500151b00007c1a8 addr 500151b00007c1c6 ses0: da6,pass6: Element descriptor: 'SLOT 026' ses0: da6,pass6: SAS Device Slot Element: 1 Phys ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( STP ) ses0: phy 0: parent 500151b00007c1a8 addr 500151b00007c1c7 ses0: da7,pass7: Element descriptor: 'SLOT 027' ses0: da7,pass7: SAS Device Slot Element: 1 Phys ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( STP ) ses0: phy 0: parent 500151b00007c1a8 addr 500151b00007c1c8 pid 10821 (gcj-dbtool), uid 0: exited on signal 6 (core dumped) (da11:mpt0:0:11:0): WRITE(10). CDB: 2a 00 09 82 7b d0 00 00 08 00 (da11:mpt0:0:11:0): CAM status: SCSI Status Error (da11:mpt0:0:11:0): SCSI status: Check Condition (da11:mpt0:0:11:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (da11:mpt0:0:11:0): Retrying command (per sense data) Limiting closed port RST response from 491 to 200 packets/sec Limiting closed port RST response from 205 to 200 packets/sec Limiting closed port RST response from 210 to 200 packets/sec Limiting closed port RST response from 215 to 200 packets/sec Limiting closed port RST response from 220 to 200 packets/sec pid 79059 (python2.7), uid 1001: exited on signal 11 (core dumped) pid 79343 (python2.7), uid 1001: exited on signal 11 (core dumped) pid 83404 (python2.7), uid 1001: exited on signal 11 (core dumped) pid 8072 (python2.7), uid 1001: exited on signal 11 (core dumped)