> FreeBSD EFI boot block
   Loader path: /boot/loader.efi

   Initializing modules: ZFS UFS
   Probing 9 block .. done
    ZFS found no pools
15 UTC 2016)
nf
Booting [/boot/kernel/kernel]..
 backend: ddb
-
no valid consoles!
Available consoles:
    efi
8+0x32dbf4 syms=[0x8+0xda730+0x8+0xd7518]
Using DTB provided by EFI at 0x1ents of the University of Caliform64.aarch64/usr/src/sys/GENERIC arm64
FreeBSD clang version 3.ct reduced performance.
Booting [/boot/kernel/kernel] in 4 seconds... 
rnia. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBS8.0 (tags/RELEASE_380/final 2625NG: WITNESS option enabled, expe2 19:48:20 UTC 2016
OSBootEvent = Successfreebsd.org:/usr/obj/a0ffe951018.
KDB: debugger backends: ddb
KDB: currentCopyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The RegD 11.0-RC1 #0 r303979: Fri Aug 1Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
Starting CPU 4 (4)
Starting CPU 5 ((202)
Starting CPU 35 (203)
Starting CPU 36 (204)
Starting CPU 37 (205)
Starting CPU 38 (206)
Starting CPU 39 (207)
Starting CPU 40 (208)
Starting CPU 41 (209)
Starting CPU 42 (20a)
Starting CPU 43 (20b)
Starting CPU 44 (20c)
Starting CPU 45 (20d)
Starting CPU 46 (20e)
Start10005)
CPU 61 (1000d)4 (10006)
Starting CPU 62 (1000e)
Starting CPU 63 (1000f)g CPU 79 (1010f)
Starting CPU 889 (10209)
Starting CPU 90 (102 on cpulist0
cpu23: <Open Firmware CPU> on cpulist0
cpu24: <Opcpu59: <Open Firmware CPU> on cpulist0
cpu60: <Open Firmware CPU> on cpulist0
cpu61: <Open Firmware CPU> on cpulist0
cpu62: <Open Firmware CPU> on cpulist0
cpu63: <Open Firmware CPU> on cpcpu64: <Open Firmware CPU> on cpulist0
cpu65: <Open Firmware CPU> on cpulist0
cpu67: <Open Firmware CPU> on cpulist0
cpu68: <Open Firmware CPU> on cpulist0
cpu69: <Open Firmware CPU> on cpulist0
cpu73: <Open Firmware CPU> on cpulist0
cpu83: <Open Firmware CPU> on cpulist0
cpu84: <Open Firmware CPU> on cpulist0
cpu87: <Open Firmware CPU> on cpulist0
cpu88: <Open Firmware CPU> on cpulist0
cpu90: <Open Firmware CPU> on cpulist0
cpu91: <Open Firmware CPU> on cpulist0
cpu92: <Open Firmware CPU> on cpulist0
cpu93: <Open Firmware CPU> on cpulist0
cpu94: <Open Firmware CPU> on cpulist0
cpu95: <Open Firmware CPU> on cpulist0
pmu0: <Performance Monitoring Unit> on ofwbus0
uart0: <PrimeCell UART (PL011)> f on simplebus0
uart0: console (115200,n,8,1)
ECAM to 0rimeCell UART (PL011)> 00-0x84800fffffff on simplebus0
avium ThunderX MDIO nexus> on mrmlbus0
thunder_mdio0: <Cavium ThunderX SMI/MDIO driver> on mdionexus0
thunder_mdio1: <Cavium ThunderX SMI/MDIO driver> on mdionexus0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib0: generic_pcie_alloc_resource_pcie FAIL: type=3, rid=32, start=0000000000000000, end=00000000000fffff, count=0000000000100000, flags=0
pcib1: failed to allocate initial memory window: 0-0xfffff
pci1: <PCI bus> on pcib1
pci1: <serial bus> at device 0.11 (no driver attached)
pci1: <memory> at device 0.12 (no driver attached)
pci1: <memory> at device 0.48 (no driver attached)
pci1: <memory> at device 0.49 (no driver attached)
pci1: <memory> at device 0.50 (npci1: <memory> at device 0.51 (no driver attached)
pci1: <memory> at device 0.52 (npci1: <memory> at device 0.53 (no driver attached)
pci1: <memory> at device 0.54 (npci1: <memory> at device 0.55 (npci1: <memory> at device 0.60 (no driver attached)
pci1: <memory> at device 0.61 (no driver attached)
o driver attached)
2 (no driver attached)
pci1: <serial bus> at device 0.74 (no driver attached)
pci1: <serial bus> at device 0.75 (no driver attached)
6 (no driver attached)
pci1: <serial bus> at device 0.77 (no driver attached)
pci1: <memory> at device 0.80 (no driver attached)
pci1: <memory> at device 0.81 (no driver attached)
pci1: <memory> at device 0.82 (no driver attached)
pci1: <memory> at device 0.83 (nbgx0: <ThunderX BGX Ethernet I/O Interface> mem 0x87e0e0000000-0x87e0e03fffff,0x87e0e0400000-0x87e0e07fffff at device 0.128 on pci1
bgx1: <ThunderX BGX Ethernet I/O7e0e17fffff at device 0.129 on pxhci1: <Cavium ThunderX USB 3.0 controller> mem 0x869000000000-0x8690001fffff,0x869000200000-0x8690002fffff at device 17.0 on pci0
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
pcib2: <PCI-PCI bridge> at devicoller> mem 0x816000000000-0x8160001fffff,0x816000200000-0x8160002fffff at device 10.0 on pci5
ahci0: unable to map interrupt
device_attach: ahci0 attach retur5)
Starting CPU 6 (6)
Starting CPU 7 (7)
Starting CPU 8 (8)
04)
Starting CPU 21 (105)
Starting CPU 22 (106)
Starting CPU 0a)
Starting CPU 59 (1000b)
Stulist0
cpu47: <Open Firmware CPU> on cpulist0
ulist0
ulist0
ulist0
ulist0
mem 0x87e025000000-0x87e025000ffci1
xhci0: <Cavium ThunderX USB 3.0 00, flags=0
ci0: unable to map interrupt
dened 6
e 2.0 on pci6
pcib6: generic_pcie_alloc_resource_pcie FAIL: typ000, end=00000000000fffff, count=0000000000100000, flags=0
pcib7: failed to allocate initial mevnicpf0: <Cavium Thunder NIC Phy000000000-0x84303fffffff,0x84306pci6: <network> at device 3.0 (n 30 (10e)
Starting CPU 31 (10f)
Starting CPU 64 (10100)
Starting CPU 65 (10101)
Starting CPU (10107)
Starting CPU 72 (10108en Firmware CPU> on cpulist0
cpcpu45: <Open Firmware CPU> on cpulist0
cpu70: <Open Firmware CPU> on cpulist0
cpu74: <Open Firmware CPU> on cpcpu77: <Open Firmware CPU> on cpulist0
mrmlbus0: <Cavium ThunderX MRML t=0000000000100000, flags=0
pcivice 0.0 (no driver attached)
t=0000000000100000, flags=0
pciemory window: 0-0xfffff
pci3: <PCI bus> on pcib3
pcib0: generice_pcie FAIL: type=3, rid=32, st00, flags=0
0000, end=00000000000fffff, count=0000000000100000, flags=0
pciart=0000846a00000000, end=000084001fffff,0x814000200000-0x814000ci0: unable to map interrupt
device_attach: ahci0 attach return001fffff,0x815000200000-0x8150002fffff at device 9.0 on pci5
ahvice_attach: ahci0 attach returnoller> mem 0x817000000000-0x8170pci6: <PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at devicahci0: <ThunderX AHCI SATA controller> mem 0x819000000000-0x8190001fffff,0x819000200000-0x8190002fffff at device 5.0 on pci8
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
ahci0: <ThunderX AHCI SATA controller> mem 0x81a000000000-0x81a0ci0: unable to map interrupt
de 0x880020000000-0x880057ffffff oTimecounters tick every 1.000 msr1p0 affinity:  0  0  3
CPU  4:0  0  4
CPU  5: Cavium Thunder r1p0 affinity:  0  0  5
CPU  6: Cavium Thunder r1p0 affinity:  r1p0 affinity:  0  0  7
CPU  8:r1p0 affinity:  0  1  9
CPU 26: Cavium Thunder r1p0 affinity:  0  2  0
CPU 33: Cavium Thunder r1p0 affinity:  0  2  1
CPU 34: Cavium Thunder r1p0 affinity:  0  2  2
CPU 35: Cavium Thunder r1p0 affinity:  0  2  3
CPU 36:0  2  4
CPU 37: Cavium Thunder r1p0 affinity:  0  2  5
CPU 38: Cavium Thunder r1p0 affinity:  0  2  6
CPU 39: Cavium Thunder r1p0 affinity:  0  2  7
CPU 40: Cavium Thunder r1p0 affinity:  0  2  8
CPU 41: Cavium Thunder r1p0 affinity:  0  2  9
CPU 42: Cavium Thunder r1p0 affinity:  0  2 10
CPU 43: Cavium Thunder r1p0 affinity:  0  2 11
CPU 44:1  2  8
CPU 89: Cavium Thunder r1p0 affinity:  1  2  9
CPU 90: Cavium Thunder r1p0 affinity:  1  2 10
CPU 91: Cavium Thunder r1p0 affinity:  1  2 11
CPU 92:rting CPU 29 (10d)
Starting CPUing CPU 47 (20f)
Starting CPU 4
Starting CPU 55 (10007)
Starti57 (10009)
Starting CPU 58 (100arting CPU 60 (1000c)
Starting rting CPU 83 (10203)
Starting CPU 84 (10204)
Starting CPU 85 (10205)
Starting CPU 86 (10206)
Starting CPU 87 (10207)
Starticpu31: <Open Firmware CPU> on cpulist0
ulist0
cpu40: <Open Firmware CPU> on cpulist0
cpu46: <Open Firmware CPU> on cpulist0
cpu71: <Open Firmware CPU> on cpulist0
cpu72: <Open Firmware CPU> on cpcpu76: <Open Firmware CPU> on cpcpu78: <Open Firmware CPU> on cpcpu79: <Open Firmware CPU> on cpulist0
cpu80: <Open Firmware CPU> on cpcpu82: <Open Firmware CPU> on cpcpu86: <Open Firmware CPU> on cpcpu89: <Open Firmware CPU> on cpulist0
mem 0x87e024000000-0x87e024000fff on simplebus0
pcib0: <Cavium Integrated PCI/PCI-E Controller> mem 0x8480000000
pcib0: ThunderX quirk, setting o driver attached)
o driver attached)
o driver attached)
pci1: <memory> at device 0.57 (npci1: <memory> at device 0.63 (npci0: <unknown> at device 9.0 (no driver attached)
controller> mem 0x868000000000-0x8680001fffff,0x868000200000-0x8680002fffff at device 16.0 on pci0
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
e 20.0 on pci0
pcib0: generic_pcie_alloc_resource_pcie FAIL: type=3, rid=32, start=0000000000000000, end=00000000000fffff, counb2: failed to allocate initial memory window: 0-0xfffff
pci2: <PCI bus> on pcib2
pci2: <mass storage, RAID> at depci4: <unknown> at device 0.0 (no driver attached)
pcib5: <Cavium Integrated PCI/PCI-E Controller> mem 0x849000000000-0x84900fffffff on simplebus0
pcib5: ThunderX quirk, setting ECAM to 1
pci5: <PCI bus> on pcib5
ahci0: <ThunderX AHCI SATA controller> mem 0x814000000000-0x81402fffff at device 8.0 on pci5
ahed 6
ahci0: <ThunderX AHCI SATA controller> mem 0x815000000000-0x8150ahci0: <ThunderX AHCI SATA contro driver attached)
pcib8: <Cavier> mem 0x84b000000000-0x84b00fffffff on simplebus0
pcib8: Thuned 6
ahci0: <ThunderX AHCI SATA controller> mem 0x81b000000000-0x81b0001fffff,0x81b000200000-0x81b0002fffff at device 7.0 on pci8
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
ahci0: <ThunderX AHCI SATA controller> mem 0x81c000000000-0x81c0001fffff,0x81c000200000-0x81c0002fffff at device 8.0 on pci8
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
ahci0: <ThunderX AHCI SATA controller> mem 0x81d000000000-0x81d0001fffff,0x81d000200000-0x81d0002fffff at device 9.0 on pci8
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
ahci0: <ThunderX AHCI SATA controller> mem 0x81e000000000-0x81e0001fffff,0x81e000200000-0x81e0002fffff at device 10.0 on pci8
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
ahci0: <ThunderX AHCI SATA controller> mem 0x81f000000000-0x81f0001fffff,0x81f000200000-0x81f0002fffff at device 11.0 on pci8
ahci0: unable to map interrupt
device_attach: ahci0 attach returned 6
pcib9: <ThunderX PEM> memn simplebus0
pcib9: Failed to allocate resource
device_attach: pcib9 attach returned 6
pcib9: <Cavium Integrated PCI/PCI-E Controller> mem 0x8480000000em 0x849000000000-0x84900fffffffpcib11: <Cavium Integrated PCI/PCI-E Controller> mem 0x84a000000000-0x84a00fffffff on simplebus1
pcib11: ThunderX quirk, setting ECAM to 2
ated PCI/PCI-E Controller> mem 0simplebus1
pcib12: ThunderX quirk, setting ECAM to 3
pci12: <PCI bus> on pcib12
pci1 1 = <0>
         Processor Features 0 = <GIC,AdvSIMD,Float,EL3,EL2,EL1,EL0>
         Processo Model Features 0 = <4k Granule,16k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,256TB PA = <0x111120>
             Debug Features 0 = <6 CTX Breakpoint0  1  2
CPU 19: Cavium Thunder 0  1  4
CPU 21: Cavium Thunder r1p0 affinity:  0  1  5
CPU 22: Cavium Thunder r1p0 affinity:  0  1  6
CPU 23: Cavium Thunder r1p0 affinity:  0  1  7
CPU 24:r1p0 affinity:  0  1 15
CPU 32: Cavium Thunder r1p0 affinity:   Cavium Thunder r1p0 affinity:  r1p0 affinity:  1  2  7
CPU 88: Cavium Thunder r1p0 affinity:  uhub0: 2 ports with 2 removable,Root mount waiting for: uStarting CPU 18 (102)
Starting CPU 19 (103)
Starting CPU 20 (1arting CPU 92 (1020c)
Starting ulist0
cpu48: <Open Firmware CPU> on cpulist0
cpu49: <Open Firmware CPU> on cpulist0
cpu50: <Open Firmware CPU> on cpulist0
cpu51: <Open Firmware CPU> on cpulist0
cpu52: <Open Firmware CPU> on cpulist0
cpu53: <Open Firmware CPU> on cpulist0
cpu54: <Open Firmware CPU> on cpulist0
cpu56: <Open Firmware CPU> on cpulist0
cpu57: <Open Firmware CPU> on cpcpu81: <Open Firmware CPU> on cpcpu85: <Open Firmware CPU> on cpo driver attached)
ed 6
ahci0: <ThunderX AHCI SATA contrderX quirk, setting ECAM to 3
001fffff,0x818000200000-0x818000
pcib9: ThunderX quirk, setting mlbus1
thunder_mdio2: <Cavium TRelease APs
CPU  0: Cavium Thunr1p0 affinity:  0  0 15
CPU 16: Cavium Thunder r1p0 affinity:  r1p0 affinity:  0  1 13
CPU 30:]...
Root mount waiting for: us XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
sbus0
sbus1 usbus0
 PCI/PCI-E Controller> mem 0x84a000000000-0x84a00fffffff on simplebus0
pcib6: ThunderX quirk, setting ECAM to 2
 quirk, setting ECAM to 1
pci10: <PCI bus> on pcib10
pci1known PMU,Unknown Debug>
             Debug Features 1 = <0>
 r1p0 affinity:  0  1  3
CPU 20: Cavium Thunder r1p0 affinity:  0  1 12
CPU 29: Cavium Thunder  Cavium Thunder r1p0 affinity:  0  1 14
CPU 31: Cavium Thunder 0  2 12
CPU 45: Cavium Thunder r1p0 affinity:  1  0  3
CPU 52:r1p0 affinity:  1  0  7
CPU 56:r1p0 affinity:  1  0 11
CPU 60: Cavium Thunder r1p0 affinity:  1  0 14
CPU 63: Cavium Thunder r1p0 affinity:  1  0 15
CPU 64: Cavium Thunder r1p0 affinity:   Cavium Thunder r1p0 affinity:  1  1 14
CPU 79: Cavium Thunder 1  2  4
CPU 85: Cavium Thunder r1p0 affinity:  1  2  5
CPU 86: Cavium Thunder r1p0 affinity:  1  2 12
CPU 93: Cavium Thunder r1p0 affinity:  1  2 13
CPU 94:1  2 14
CPU 95: Cavium Thunder r1p0 affinity:  1  2 15
WARNING: WITNESS option enabled,/ufs/FreeBSD_Install [ro,noatimesbus0
h returned 6
pcib10: <Cavium Integrated PCI/PCI-E Controller> m on simplebus1
pcib10: ThunderXx84b000000000-0x84b00fffffff on  Cavium Thunder r1p0 affinity:  0  0  6
CPU  7: Cavium Thunder  Cavium Thunder r1p0 affinity:  ddr 1> on usbus1
uhub1: <0x177dRoot mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
riptor at addr 1 failed, USB_ERRRoot mount waiting for: usbus1 uRoot mount waiting for: usbus1 usbus0
_TIMEOUT
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 uRoot mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 uusbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus1 uRoot mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 uRoot mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
sbus0
sbus0
sbus0
Root mount waiting for: usbus1 uRoot mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 uusbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERRsbus0
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus1 usbus0
device descriptor at addr 5 failusbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_TIMEOUT
ugen0.2: <Uuhub_reattach_port: could not allocate new device
Root mount waiting for: usbus1 usbus0
ed, USB_ERR_TIMEOUT
ugen1.2: <Unknown> at usbus1 (disconnected)
Root mount waiting for: usbus1 usbus0
uhub_reattach_port: could not allocate new device
nknown> at usbus0 (disconnected)
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
device descriptor at addr 7 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus1
Root mount waiting for: usbus1
usbd_setup_device_desc: getting Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
usbd_setup_device_desc: getting device descriptor at addr 9 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
)
uhub_reattach_port: could not allocate new device
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
Root mount waiting for: usbus1
Root mount waiting for: usbus1


Loader variables:
  vfs.root.mountfrom=ufs:/dev/ufs/FreeBSD_Install
  vfs.root.mountfrom.options=ro,noatime

Manual root filesystem specification:
  <fstype>:<device> [options]
      Mount <device> using filesystem <fstype>
      and with the specified (optional) option list.

    eg. ufs:/dev/da0s1a
        zfs:tank
        cd9660:/dev/cd0 ro
          (which is eq    List valid disk boot devices
  .               Yield 1 second (for background tasks)
  <empty line>    Abort manual input

mountroot> uivalent to: mount -t cd9660 -o ro /dev/cd0 /)

  ?           Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.