diff --git a/sysutils/Makefile b/sysutils/Makefile
index ebeb0af..94fd084 100644
--- a/sysutils/Makefile
+++ b/sysutils/Makefile
@@ -1116,6 +1116,7 @@
     SUBDIR += u-boot-bananapi
     SUBDIR += u-boot-bananapim2
     SUBDIR += u-boot-beaglebone
+    SUBDIR += u-boot-chip
     SUBDIR += u-boot-cubieboard
     SUBDIR += u-boot-cubieboard2
     SUBDIR += u-boot-cubox-hummingboard
diff --git a/sysutils/u-boot-chip/Makefile b/sysutils/u-boot-chip/Makefile
new file mode 100644
index 0000000..f8439d8
--- /dev/null
+++ b/sysutils/u-boot-chip/Makefile
@@ -0,0 +1,14 @@
+# $FreeBSD$
+
+PKGNAMESUFFIX=	-chip
+
+COMMENT=	Cross-build U-Boot loader for NextThingCo CHIP
+
+LICENSE=	GPLv2
+
+MASTERDIR=	${.CURDIR}/../u-boot-olimex-a20-som-evb
+DESCR=		${.CURDIR}/pkg-descr
+MODEL=		sun5i-r8-chip
+BOARD_CONFIG=	CHIP_defconfig
+
+.include "${MASTERDIR}/Makefile"
diff --git a/sysutils/u-boot-chip/pkg-descr b/sysutils/u-boot-chip/pkg-descr
new file mode 100644
index 0000000..af400cb
--- /dev/null
+++ b/sysutils/u-boot-chip/pkg-descr
@@ -0,0 +1,19 @@
+U-Boot loader for NextThingCo CHIP.
+
+To install this bootloader on an sdcard just do :
+dd if=/usr/local/share/u-boot/u-boot-boardname/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
+
+This version is patched so that:
+ * ELF and API features are enabled.
+ * The default environment is trimmed to just what's needed to boot.
+ * The saveenv command writes to the file u-boot.env on the FAT partition.
+ * The DTB file name is chosen based on the board model and passed to ubldr.bin
+   using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
+   the FreeBSD partition.
+ * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
+   to address 0x42000000, and launches it.
+
+For information about running FreeBSD on Allwinner boards, see
+ https://wiki.freebsd.org/FreeBSD/arm/Allwinner
+
+For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot