atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 60 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. acpi_syscontainer0: port 0x2e-0x2f,0x4e-0x4f,0x620-0x65f,0x680-0x69f,0x600-0x61f,0x660-0x67f,0x300-0x30f on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 61 uart0: fast interrupt uart0: PPS capture mode: DCDinvalid fdc0: port 0x3f0-0x3f3 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 acpi0: wakeup code va 0xfffffe0861293000 pa 0x90000 ex_isa_identify() ahc_isa_identify 0: ioport 0xc00 alloc failed ahc_isa_identify 1: ioport 0x1c00 alloc failed ahc_isa_identify 2: ioport 0x2c00 alloc failed ahc_isa_identify 3: ioport 0x3c00 alloc failed ahc_isa_identify 4: ioport 0x4c00 alloc failed ahc_isa_identify 5: ioport 0x5c00 alloc failed ahc_isa_identify 6: ioport 0x6c00 alloc failed ahc_isa_identify 7: ioport 0x7c00 alloc failed ahc_isa_identify 8: ioport 0x8c00 alloc failed ahc_isa_identify 9: ioport 0x9c00 alloc failed ahc_isa_identify 10: ioport 0xac00 alloc failed ahc_isa_identify 11: ioport 0xbc00 alloc failed ahc_isa_identify 12: ioport 0xcc00 alloc failed ahc_isa_identify 13: ioport 0xdc00 alloc failed ahc_isa_identify 14: ioport 0xec00 alloc failed pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcafff,0xe6000-0xe7fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 atrtc0: at port 0x70 irq 8 on isa0 pcib0: allocated type 4 (0x70-0x71) for rid 0 of atrtc0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 62 Event timer "RTC" frequency 32768 Hz quality 0 fdc0: No FDOUT register! fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0 failed to probe at irq 7 on isa0 pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1 uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72007200600061a device_attach: est0 attach returned 6 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72007200600061a device_attach: est1 attach returned 6 est2: on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72007200600061a device_attach: est2 attach returned 6 est3: on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 72007200600061a device_attach: est3 attach returned 6 Device configuration finished. procfs registered Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining tcp_init: net.inet.tcp.tcbhashsize auto tuned to 262144 lo0: bpf attached hptnr: no controller detected. hpt27xx: no controller detected. hptrr: no controller detected. bce0: link state changed to DOWN random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 usbus5: 12Mbps Full Speed USB v1.0 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=10 stat1=01 devices=0x10000 ugen1.1: at usbus1 uhub0: on usbus1 ugen0.1: at usbus0 uhub1: on usbus0 ugen3.1: at usbus3 uhub2: on usbus3 ugen2.1: at usbus2 uhub3: on usbus2 ugen5.1: at usbus5 uhub4: on usbus5 ugen4.1: at usbus4 uhub5: on usbus4 ciss0: command status 0x2 (data underrun) scsi status 0x0 ciss0: command status 0x2 (data underrun) scsi status 0x0 ciss0: command status 0x2 (data underrun) scsi status 0x0 ciss0: command status 0x2 (data underrun) scsi status 0x0 ciss0: command status 0x2 (data underrun) scsi status 0x0 (probe0:ciss0:0:0:0): Down reving Protocol Version from 2 to 0? uhub2: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered ugen5.2: at usbus5 ukbd0: on usbus5 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 (probe0:mps0:0:8:0): Down reving Protocol Version from 4 to 0? mps0: SAS Address for SATA device = 3939483186913a4c mps0: SAS Address from SATA device = 3939483186913a4c (probe1:mps0:0:10:0): Down reving Protocol Version from 4 to 0? mps0: SAS Address for SATA device = 393948318a8c5432 mps0: SAS Address from SATA device = 393948318a8c5432 (probe2:mps0:0:7:0): Down reving Protocol Version from 4 to 0? uhub5: 8 ports with 8 removable, self powered mps0: SAS Address for SATA device = 39394831856c5b35 mps0: SAS Address from SATA device = 39394831856c5b35 mps0: SAS Address for SATA device = 3939483185703f42 mps0: SAS Address from SATA device = 3939483185703f42 (probe3:mps0:0:9:0): Down reving Protocol Version from 4 to 0? ugen4.2: at usbus4 umass0: on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:4:0:-1: Attached to scbus4 (probe4:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? mps0: SAS Address for SATA device = 393a5f317387402f mps0: SAS Address from SATA device = 393a5f317387402f (probe4:mps0:0:6:0): Down reving Protocol Version from 4 to 0? mps0: SAS Address for SATA device = 393a5f316e8b3c49 mps0: SAS Address from SATA device = 393a5f316e8b3c49 (probe5:mps0:0:5:0): Down reving Protocol Version from 4 to 0? mps0: SAS Address for SATA device = 393948318290494e mps0: SAS Address from SATA device = 393948318290494e (probe6:mps0:0:4:0): Down reving Protocol Version from 4 to 0? mps0: SAS Address for SATA device = 3939483182944f2e mps0: SAS Address from SATA device = 3939483182944f2e (probe7:mps0:0:3:0): Down reving Protocol Version from 4 to 0? (probe0:mps0:0:8:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:8:0): CAM status: CCB request completed with an error (probe0:mps0:0:8:0): Retrying command (probe0:mps0:0:8:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:8:0): CAM status: CCB request completed with an error (probe0:mps0:0:8:0): Retrying command (probe0:mps0:0:8:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:8:0): CAM status: CCB request completed with an error (probe0:mps0:0:8:0): Retrying command (probe0:mps0:0:8:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:8:0): CAM status: CCB request completed with an error (probe0:mps0:0:8:0): Retrying command (probe0:mps0:0:8:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:8:0): CAM status: CCB request completed with an error (probe0:mps0:0:8:0): Error 5, Retries exhausted GEOM: new disk cd0 GEOM: new disk da0 da0 at mps0 bus 0 scbus0 target 3 lun 0 da0: Fixed Direct Access SPC-3 SCSI device da0: Serial Number WCC2HZG0 da0: 600.000MB/s transfers da0: Command Queueing enabled da0: 1907729MB (3907029168 512 byte sectors) da1 at mps0 bus 0 scbus0 target 4 lun 0 da1: Fixed Direct Access SPC-3 SCSI device da1: Serial Number WCC2HVAP da1: 600.000MB/s transfers da1: Command Queueing enabled da1: 1907729MB (3907029168 512 byte sectors) da4 at mps0 bus 0 scbus0 target 7 lun 0 da4: Fixed Direct Access SPC-3 SCSI device da4: Serial Number WCC2PRL4 da4: 600.000MB/s transfers da4: Command Queueing enabled da4: 1907729MB (3907029168 512 byte sectors) da5 at mps0 bus 0 scbus0 target 9 lun 0 da5: Fixed Direct Access SPC-3 SCSI device da5: Serial Number WCC2K67D da5: 600.000MB/s transfers da5: Command Queueing enabled da5: 1907729MB (3907029168 512 byte sectors) da3 at mps0 bus 0 scbus0 target 6 lun 0 da3: Fixed Direct Access SPC-3 SCSI device da3: Serial Number WDZ29M81 da3: 600.000MB/s transfers da3: Command Queueing enabled da3: 1907729MB (3907029168 512 byte sectors) cd0 at ata0 bus 0 scbus3 target 0 lun 0 cd0: Removable CD-ROM SCSI device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed da0: Delete methods: GEOM: new disk da1 GEOM: new disk da2 GEOM: new disk da3 GEOM: new disk da4 da1: Delete methods: GEOM: new disk da5 da7 at ciss0 bus 0 scbus1 target 0 lun 0 da7: Fixed Direct Access SCSI device da7: 135.168MB/s transfers da7: Command Queueing enabled da7: 57195MB (117136800 512 byte sectors) da7: Delete methods: da4: Delete methods: da5: Delete methods: da3: Delete methods: da6 at mps0 bus 0 scbus0 target 10 lun 0 da6: Fixed Direct Access SPC-3 SCSI device da6: Serial Number WCC2LW2N da6: 600.000MB/s transfers da6: Command Queueing enabled da6: 1907729MB (3907029168 512 byte sectors) pass0 at mps0 bus 0 scbus0 target 3 lun 0 pass0: Fixed Direct Access SPC-3 SCSI device pass0: Serial Number WCC2HZG0 da8 at umass-sim0 bus 0 scbus4 target 0 lun 0 da8: Removable Direct Access SCSI device da8: Serial Number FLZ98OV2SU9O5VTP da8: 40.000MB/s transfers da8: 1912MB (3915776 512 byte sectors) da8: quirks=0x2 da8: Delete methods: da6: Delete methods: pass0: 600.000MB/s transfers pass0: Command Queueing enabled pass1 at mps0 bus 0 scbus0 target 4 lun 0 pass1: Fixed Direct Access SPC-3 SCSI device pass1: Serial Number WCC2HVAP pass1: 600.000MB/s transfers pass1: Command Queueing enabled pass2 at mps0 bus 0 scbus0 target 5 lun 0 pass2: Fixed Direct Access SPC-3 SCSI device pass2: Serial Number WDZ24Q4K pass2: 600.000MB/s transfers pass2: Command Queueing enabled pass3 at mps0 bus 0 scbus0 target 6 lun 0 pass3: Fixed Direct Access SPC-3 SCSI device pass3: Serial Number WDZ29M81 pass3: 600.000MB/s transfers pass3: Command Queueing enabled pass4 at mps0 bus 0 scbus0 target 7 lun 0 pass4: Fixed Direct Access SPC-3 SCSI device pass4: Serial Number WCC2PRL4 pass4: 600.000MB/s transfers pass4: Command Queueing enabled pass5 at mps0 bus 0 scbus0 target 9 lun 0 pass5: Fixed Direct Access SPC-3 SCSI device pass5: Serial Number WCC2K67D pass5: 600.000MB/s transfers pass5: Command Queueing enabled pass6 at mps0 bus 0 scbus0 target 10 lun 0 pass6: Fixed Direct Access SPC-3 SCSI device pass6: Serial Number WCC2LW2N pass6: 600.000MB/s transfers pass6: Command Queueing enabled pass7 at ciss0 bus 0 scbus1 target 0 lun 0 pass7: Fixed Direct Access SCSI device pass7: 135.168MB/s transfers pass7: Command Queueing enabled pass8 at ata0 bus 0 scbus3 target 0 lun 0 pass8: Removable CD-ROM SCSI device pass8: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) pass9 at umass-sim0 bus 0 scbus4 target 0 lun 0 pass9: Removable Direct Access SCSI device pass9: Serial Number FLZ98OV2SU9O5VTP pass9: 40.000MB/s transfers da2 at mps0 bus 0 scbus0 target 5 lun 0 da2: Fixed Direct Access SPC-3 SCSI device da2: Serial Number WDZ24Q4K da2: 600.000MB/s transfers da2: Command Queueing enabled da2: 1907729MB (3907029168 512 byte sectors) da2: Delete methods: SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x07000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 6 vector 48 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 7 vector 48 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 6 vector 49 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 7 vector 49 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 1 vector 50 msi: Assigning MSI-X IRQ 256 to local APIC 6 vector 50 msi: Assigning MSI IRQ 257 to local APIC 7 vector 50 SMP: passed TSC synchronization test TSC timecounter discards lower 1 bit(s) Timecounter "TSC-low" frequency 1166732535 Hz quality 1000 GEOM: new disk da6 GEOM: new disk da7 GEOM: new disk da8 (da8:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL not supported. Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... start_init: trying /sbin/init ums0: on usbus5 ums0: 3 buttons and [XY] coordinates ID=0