---<>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-BETA3 r340039 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(efifb): resolution 1280x1024 CPU: Intel(R) Xeon(R) CPU E3-1505M v5 @ 2.80GHz (2808.14-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3 Features=0xbfebfbff Features2=0x7ffafbff AMD Features=0x2c100800 AMD Features2=0x121 Structured Extended Features=0x29c6fbf Structured Extended Features3=0x9c000000 XSAVE Features=0xf VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 68719476736 (65536 MB) avail memory = 66639814656 (63552 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 irqs 0-119 on motherboard Launching APs: 1 5 2 6 3 4 7 Timecounter "TSC-low" frequency 1404068071 Hz quality 1000 random: entropy device external interface netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f7670, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 efirtc0: on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: on motherboard aesni0: on motherboard acpi0: on motherboard acpi_ec0: port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: on acpi0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0x3000-0x307f mem 0xd3000000-0xd3ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff at device 0.0 on pci1 vgapci1: port 0x4000-0x403f mem 0xd2000000-0xd2ffffff,0x60000000-0x7fffffff at device 2.0 on pci0 acpi_video1: on vgapci1 vgapci1: Boot video device xhci0: mem 0xd4420000-0xd442ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: at device 22.0 (no driver attached) pci0: at device 22.3 (no driver attached) ahci0: port 0x4088-0x408f,0x4090-0x4093,0x4060-0x407f mem 0xd4448000-0xd4449fff,0xd444e000-0xd444e0ff,0xd444c000-0xd444c7ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich3: at channel 3 on ahci0 ahciem0: on ahci0 pcib2: at device 28.0 on pci0 pci2: on pcib2 iwm0: mem 0xd4300000-0xd4301fff at device 0.0 on pci2 pcib3: at device 28.4 on pci0 pci3: on pcib3 pcib4: at device 29.0 on pci0 pci4: on pcib4 nvme0: mem 0xd4200000-0xd4203fff at device 0.0 on pci4 pcib5: at device 29.4 on pci0 pci5: on pcib5 pci5: at device 0.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 pci0: at device 31.2 (no driver attached) hdac0: mem 0xd4440000-0xd4443fff,0xd4430000-0xd443ffff at device 31.3 on pci0 em0: mem 0xd4400000-0xd441ffff at device 31.6 on pci0 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 1 em0: Unable to map MSIX table em0: Using an MSI interrupt em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: c8:5b:76:82:e6:12 em0: netmap queues/slots: TX 1/1024, RX 1/1024 acpi_tz0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: on acpi0 acpi_acad0: on acpi0 acpi_ibm0: on acpi0 uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0 uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 iwm0: hw rev 0x200, fw ver 22.361476.0, address f0:d5:bf:0f:ce:27 nvd0: NVMe namespace nvd0: 976762MB (2000409264 512 byte sectors) hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 GEOM_ELI: Device nvd0p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware pcm0: at nid 20,33 and 24 on hdaa0 pcm1: at nid 18 on hdaa0 ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich3 bus 0 scbus0 target 0 lun 0 ada0: ACS-3 ATA SATA 3.x device ada0: Serial Number WDZ9XYQ4 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 uhub0: 26 ports with 26 removable, self powered Root mount waiting for: usbus0 ugen0.2: at usbus0 ukbd0 on uhub0 ukbd0: on usbus0 kbd2 at ukbd0 ugen0.3: at usbus0 ukbd1 on uhub0 ukbd1: on usbus0 kbd3 at ukbd1 Root mount waiting for: usbus0 ugen0.4: at usbus0 ukbd2 on uhub0 ukbd2: on usbus0 kbd4 at ukbd2 Root mount waiting for: usbus0 ugen0.5: at usbus0 ugen0.6: at usbus0 Root mount waiting for: usbus0 ugen0.7: at usbus0 anon_inodefs_init: drmn1: on vgapci1 vgapci1: child drmn1 requested pci_enable_io vgapci1: child drmn1 requested pci_enable_io [drm] Memory usable by graphics device = 4096M [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] DMC: load work fn start i915/skl_dmc_ver1_26.bin: could not load firmware image, error 2 [drm] Connector eDP-1: get mode from tunables: [drm] - kern.vt.fb.modes.eDP-1 [drm] - kern.vt.fb.default_mode i915/skl_huc_ver01_07.bin: could not load firmware image, error 2 i915/skl_dmc_ver1_26.bin: could not load firmware image, error 2 i915/skl_huc_ver01_07.bin: could not load firmware image, error 2 [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26) [drm] DMC: load work fn end [drm] GuC firmware load skipped [drm] Initialized i915 1.6.0 20170123 for drmn1 on minor 0 VT: Replacing driver "efifb" with new "fb". start FB_INFO: type=11 height=800 width=1280 depth=32 cmsize=16 size=4096000 pbase=0x60040000 vbase=0xfffff80060040000 name=drmn1 flags=0x0 stride=5120 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn1: fb0: inteldrmfb frame buffer device wlan0: Ethernet address: c8:5b:76:82:e6:12 lo0: link state changed to UP [drm] RC6 on lagg0: link state changed to DOWN wlan0: link state changed to UP lagg0: link state changed to UP ums0 on uhub0 ums0: on usbus0 ums0: 8 buttons and [XYZT] coordinates ID=1 uhid0 on uhub0 uhid0: on usbus0 uhid1 on uhub0 uhid1: on usbus0 ubt0 on uhub0 ubt0: on usbus0 em0: link state changed to UP WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() ubt0: ubt_ctrl_write_callback:782: control transfer failed: USB_ERR_TIMEOUT ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout tap0: Ethernet address: 00:bd:cb:38:0f:00 bridge0: Ethernet address: 02:1d:75:d6:a3:00 em0: promiscuous mode enabled bridge0: link state changed to UP wlan0: promiscuous mode enabled lagg0: promiscuous mode enabled iwm0: need promiscuous mode update callback tap0: promiscuous mode enabled Failed to fully fault in a core file segment at VA 0x805400000 with size 0x4000000000 to be written at offset 0x2d60000 for process baloo_file pid 2267 (baloo_file), uid 1001: exited on signal 6 (core dumped) Failed to fully fault in a core file segment at VA 0x805400000 with size 0x4000000000 to be written at offset 0x3649000 for process baloo_file pid 2347 (baloo_file), uid 1001: exited on signal 6 (core dumped) tap0: link state changed to UP tap0: link state changed to DOWN tap0: link state changed to UP tap0: link state changed to DOWN tap0: link state changed to UP tap0: link state changed to DOWN tap0: link state changed to UP tap0: link state changed to DOWN tap0: link state changed to UP ugen0.4: at usbus0 (disconnected) ums0: at uhub0, port 6, addr 3 (disconnected) ums0: detached ukbd2: at uhub0, port 6, addr 3 (disconnected) ukbd2: detached uhid0: at uhub0, port 6, addr 3 (disconnected) uhid0: detached em0: link state changed to DOWN ugen0.2: at usbus0 (disconnected) ukbd0: at uhub0, port 2, addr 1 (disconnected) ukbd0: detached wlan0: link state changed to DOWN lagg0: link state changed to DOWN uhub0: at usbus0, port 1, addr 1 (disconnected) ugen0.3: at usbus0 (disconnected) ukbd1: at uhub0, port 5, addr 2 (disconnected) ukbd1: detached ugen0.5: at usbus0 (disconnected) ugen0.6: at usbus0 (disconnected) uhid1: at uhub0, port 13, addr 5 (disconnected) uhid1: detached ugen0.7: at usbus0 (disconnected) ubt0: at uhub0, port 14, addr 6 (disconnected) ubt0: detached vgapci1: child drmn1 requested pci_set_powerstate pcib0: failed to set ACPI power state D2 on \134_SB_.PCI0: AE_BAD_PARAMETER acpi0: cleared fixed power button status vgapci1: child drmn1 requested pci_set_powerstate vgapci1: child drmn1 requested pci_enable_io vgapci1: child drmn1 requested pci_enable_io [drm] GuC firmware load skipped uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 [drm] RC6 on uhub0: 26 ports with 26 removable, self powered ugen0.2: at usbus0 ukbd0 on uhub0 ukbd0: on usbus0 kbd2 at ukbd0 ugen0.3: at usbus0 wlan0: link state changed to UP lagg0: link state changed to UP ugen0.4: at usbus0 uhid0 on uhub0 uhid0: on usbus0 ugen0.5: at usbus0 ubt0 on uhub0 ubt0: on usbus0 nvme0: Resetting controller due to a timeout. nvme0: resetting controller nvme0: aborting outstanding i/o nvme0: WRITE sqid:1 cid:70 nsid:1 lba:393903408 len:16 nvme0: ABORTED - BY REQUEST (00/07) sqid:1 cid:70 cdw0:0 nvme0: aborting outstanding i/o nvme0: WRITE sqid:1 cid:91 nsid:1 lba:344509400 len:32 nvme0: ABORTED - BY REQUEST (00/07) sqid:1 cid:91 cdw0:0 nvme0: aborting outstanding i/o nvme0: WRITE sqid:2 cid:102 nsid:1 lba:375717888 len:8 nvme0: ABORTED - BY REQUEST (00/07) sqid:2 cid:102 cdw0:0 nvme0: aborting outstanding i/o nvme0: READ sqid:2 cid:108 nsid:1 lba:340825896 len:8 nvme0: ABORTED - BY REQUEST (00/07) sqid:2 cid:108 cdw0:0 nvme0: aborting outstanding i/o nvme0: WRITE sqid:2 cid:74 nsid:1 lba:344509472 len:152 nvme0: ABORTED - BY REQUEST (00/07) sqid:2 cid:74 cdw0:0 nvme0: aborting outstanding i/o nvme0: WRITE sqid:2 cid:125 nsid:1 lba:341775064 len:256 nvme0: ABORTED - BY REQUEST (00/07) sqid:2 cid:125 cdw0:0 nvme0: aborting outstanding i/o nvme0: WRITE sqid:2 cid:126 nsid:1 lba:341775320 len:48 nvme0: ABORTED - BY REQUEST (00/07) sqid:2 cid:126 cdw0:0 nvme0: aborting outstanding i/o nvme0: DATASET MANAGEMENT sqid:3 cid:104 nsid:1 nvme0: ABORTED - BY REQUEST (00/07) sqid:3 cid:104 cdw0:0 nvme0: aborting outstanding i/o nvme0: DATASET MANAGEMENT sqid:3 cid:71 nsid:1 nvme0: ABORTED - BY REQUEST (00/07) sqid:3 cid:71 cdw0:0 nvme0: aborting outstanding i/o nvme0: DATASET MANAGEMENT sqid:3 cid:68 nsid:1 nvme0: ABORTED - BY REQUEST (00/07) sqid:3 cid:68 cdw0:0 nvme0: aborting outstanding i/o nvme0: DATASET MANAGEMENT sqid:3 cid:72 nsid:1 nvme0: ABORTED - BY REQUEST (00/07) sqid:3 cid:72 cdw0:0 nvme0: aborting outstanding i/o nvme0: DATASET MANAGEMENT sqid:3 cid:127 nsid:1 nvme0: ABORTED - BY REQUEST (00/07) sqid:3 cid:127 cdw0:0 nvme0: aborting outstanding i/o nvme0: DATASET MANAGEMENT sqid:3 cid:126 nsid:1 nvme0: ABORTED - BY REQUEST (00/07) sqid:3 cid:126 cdw0:0 nvme0: aborting outstanding i/o nvme0: DATASET MANAGEMENT sqid:3 cid:79 nsid:1 nvme0: ABORTED - BY REQUEST (00/07) sqid:3 cid:79 cdw0:0 nvme0: aborting outstanding i/o nvme0: DATASET MANAGEMENT sqid:3 cid:118 nsid:1 nvme0: ABORTED - BY REQUEST (00/07) sqid:3 cid:118 cdw0:0 nvme0: aborting outstanding i/o nvme0: WRITE sqid:3 cid:107 nsid:1 lba:344482928 len:72 nvme0: ABORTED - BY REQUEST (00/07) sqid:3 cid:107 cdw0:0 nvme0: aborting outstanding i/o nvme0: WRITE sqid:4 cid:51 nsid:1 lba:258506664 len:8 nvme0: ABORTED - BY REQUEST (00/07) sqid:4 cid:51 cdw0:0 nvme0: aborting outstanding i/o nvme0: WRITE sqid:4 cid:67 nsid:1 lba:258506920 len:88 nvme0: ABORTED - BY REQUEST (00/07) sqid:4 cid:67 cdw0:0 nvme0: aborting outstanding i/o nvme0: READ sqid:4 cid:113 nsid:1 lba:257073880 len:24 nvme0: ABORTED - BY REQUEST (00/07) sqid:4 cid:113 cdw0:0 nvme0: aborting outstanding i/o nvme0: WRITE sqid:4 cid:107 nsid:1 lba:344509760 len:104 nvme0: ABORTED - BY REQUEST (00/07) sqid:4 cid:107 cdw0:0 nvme0: aborting outstanding i/o nvme0: WRITE sqid:4 cid:92 nsid:1 lba:344509688 len:72 nvme0: ABORTED - BY REQUEST (00/07) sqid:4 cid:92 cdw0:0 nvme0: aborting outstanding i/o nvme0: WRITE sqid:4 cid:50 nsid:1 lba:344509864 len:104 nvme0: ABORTED - BY REQUEST (00/07) sqid:4 cid:50 cdw0:0 ubt0: ubt_ctrl_write_callback:782: control transfer failed: USB_ERR_TIMEOUT ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout em0: link state changed to UP ugen0.6: at usbus0 ukbd1 on uhub0 ukbd1: on usbus0 kbd3 at ukbd1 ugen0.6: at usbus0 (disconnected) ukbd1: at uhub0, port 1, addr 5 (disconnected) ukbd1: detached ugen0.6: at usbus0 ukbd1 on uhub0 ukbd1: on usbus0 kbd3 at ukbd1 ugen0.7: at usbus0 ums0 on uhub0 ums0: on usbus0 ums0: 8 buttons and [XYZT] coordinates ID=1 ukbd2 on uhub0 ukbd2: on usbus0 kbd4 at ukbd2 uhid1 on uhub0 uhid1: on usbus0