==================================================
dmesg
==================================================
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz (1512.06-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406e3  Family=0x6  Model=0x4e  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3947098112 (3764 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  CCSKLm30>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-119 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1512064220 Hz quality 1000
random: entropy device external interface
kbd0 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <INTEL CCSKLm30> on motherboard
Firmware Error (ACPI): Failure looking up [\134_SB.PCI0.SAT1], AE_NOT_FOUND (20171214/dswload-328)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20171214/psobject-371)
ACPI Error: AE_NOT_FOUND, (SSDT:CCSKLm30) while loading table (20171214/tbxfload-355)
ACPI Error: 1 table load failures, 7 successful (20171214/tbxfload-378)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xdf110000-0xdf11ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci1: <ACPI PCI bus> on pcib2
iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xdf000000-0xdf001fff irq 18 at device 0.0 on pci1
sdhci_pci0: <Generic SD HCI> mem 0xdf12a000-0xdf12afff irq 21 at device 30.4 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <MMC/SD bus> on sdhci_pci0
sdhci_pci1: <Generic SD HCI> mem 0xdf129000-0xdf129fff irq 23 at device 30.6 on pci0
sdhci_pci1: 1 slot(s) allocated
mmc1: <MMC/SD bus> on sdhci_pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xdf120000-0xdf123fff,0xdf100000-0xdf10ffff irq 16 at device 31.3 on pci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
iwm0: hw rev 0x200, fw ver 22.361476.0, address a0:c5:89:54:f0:ec
mmcsd0: 61GB <MMCHC M52564 0.1 SN 0EDDA54B MFG 09/2016 by 112 0x0000> at mmc0 200.0MHz/8bit/8192-block
mmcsd0boot0: 4MB partion 1 at mmcsd0
mmcsd0boot1: 4MB partion 2 at mmcsd0
mmcsd0rpmb: 4MB partion 3 at mmcsd0
sdhci_pci1-slot0: Bus power failed to enableuhub0: 18 ports with 18 removable, self powered
ugen0.2: <VIA Labs, Inc. USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/60.01, addr 1> on usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.3: <VIA Labs, Inc. USB2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/b.e0, addr 2> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.4: <Razer Razer Imperator> at usbus0
ukbd0 on uhub2
ukbd0: <Razer Razer Imperator, class 0/0, rev 2.00/2.00, addr 3> on usbus0
kbd1 at ukbd0
ugen0.5: <vendor 0x04d9 USB-HID Keyboard> at usbus0
ukbd1 on uhub2
ukbd1: <vendor 0x04d9 USB-HID Keyboard, class 0/0, rev 1.10/1.07, addr 4> on usbus0
kbd2 at ukbd1
ugen0.6: <vendor 0x8087 product 0x0a2b> at usbus0
ugen0.7: <VIA Labs, Inc. USB3.0 Hub> at usbus0
uhub3 on uhub0
uhub3: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/60.01, addr 6> on usbus0
uhub3: 4 ports with 4 removable, self powered
ugen0.8: <VIA Labs, Inc. USB3.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/b.e1, addr 7> on usbus0
uhub4: 4 ports with 4 removable, self powered
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
ugen0.9: <Realtek USB 101001000 LAN> at usbus0
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
mmc1: No compatible cards found on bus
hdacc0: <Intel Skylake HDA CODEC> at cad 2 on hdac0
hdaa0: <Intel Skylake Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa0
Trying to mount root from ufs:/dev/mmcsd0p2 [rw]...
random: unblocking device.
wlan0: Ethernet address: a0:c5:89:54:f0:ec
ums0 on uhub2
ums0: <Razer Razer Imperator, class 0/0, rev 2.00/2.00, addr 3> on usbus0
ums0: 8 buttons and [XYZ] coordinates ID=0
uhid0 on uhub2
uhid0: <vendor 0x04d9 USB-HID Keyboard, class 0/0, rev 1.10/1.07, addr 4> on usbus0
uhid1 on uhub2
uhid1: <vendor 0x04d9 USB-HID Keyboard, class 0/0, rev 1.10/1.07, addr 4> on usbus0
ubt0 on uhub0
ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.01, addr 5> on usbus0
cdce0 on uhub4
cdce0: <CDC Communications Control> on usbus0
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 00:e1:11:00:1d:99
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
pflog0: promiscuous mode enabled
CPU: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz (1512.06-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406e3  Family=0x6  Model=0x4e  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0000, but there is no active command.
Issuing erase command failed Timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877e00 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00000001 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0000, but there is no active command.
Error indicated: 1 Timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0000, but there is no active command.
Error indicated: 1 Timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000005
sdhci_pci0-slot0: Argument: 0x049fdfa0 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689601024, length=2560)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0000, but there is no active command.
Error indicated: 1 Timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0000, but there is no active command.
Error indicated: 1 Timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000005
sdhci_pci0-slot0: Argument: 0x049fdfa8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689605120, length=2560)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: mmcsd0: Got AutoCMD12 error 0x0000, but there is no active command.
Error indicated: 1 Timeout
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000004
sdhci_pci0-slot0: Argument: 0x049fdfb0 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689609216, length=2048)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000004
sdhci_pci0-slot0: Argument: 0x049fe1c0 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689879552, length=2048)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000004
sdhci_pci0-slot0: Argument: 0x049fe1c8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689883648, length=2048)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000004
sdhci_pci0-slot0: Argument: 0x049fe1d0 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689887744, length=2048)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000004
sdhci_pci0-slot0: Argument: 0x049fe1d8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689891840, length=2048)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000005
sdhci_pci0-slot0: Argument: 0x049fe1e0 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689895936, length=2560)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000005
sdhci_pci0-slot0: Argument: 0x049fe1e8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689900032, length=2560)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000004
sdhci_pci0-slot0: Argument: 0x049fe1f0 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689904128, length=2048)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000004
sdhci_pci0-slot0: Argument: 0x049fe200 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689912320, length=2048)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000005
sdhci_pci0-slot0: Argument: 0x049fe208 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689916416, length=2560)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000005
sdhci_pci0-slot0: Argument: 0x049fe210 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39689920512, length=2560)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000008
sdhci_pci0-slot0: Argument: 0x022975a8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff0033
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=18536419328, length=4096)]error = 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000008
sdhci_pci0-slot0: Argument: 0x022975a8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff0033
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=18536419328, length=4096)]error = 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000008
sdhci_pci0-slot0: Argument: 0x022975a8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff0033
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=18536419328, length=4096)]error = 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000008
sdhci_pci0-slot0: Argument: 0x022975a8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff0033
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=18536419328, length=4096)]error = 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000008
sdhci_pci0-slot0: Argument: 0x022975a8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff0033
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=18536419328, length=4096)]error = 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000010
sdhci_pci0-slot0: Argument: 0x01f232d8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=16682168320, length=8192)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000020
sdhci_pci0-slot0: Argument: 0x04986340 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39438417920, length=16384)]error = 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000004
sdhci_pci0-slot0: Argument: 0x04985e80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39437795328, length=2048)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000010
sdhci_pci0-slot0: Argument: 0x049868c8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39439142912, length=8192)]error = 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: 
Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000020
sdhci_pci0-slot0: Argument: 0x04986340 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39438417920, length=16384)]error = 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000010
sdhci_pci0-slot0: Argument: 0x049868c8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
error = 5
vnode_pager_generic_getpages_done: I/O read error 5
g_vfs_done():mmcsd0p2[READ(offset=39439142912, length=8192)]error = 5
mmcsd0: Setting erase start position failed Timeout
g_vfs_done():mmcsd0p2[READ(offset=39437799424, length=512)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000020
sdhci_pci0-slot0: Argument: 0x04986340 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39438417920, length=16384)]error = 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000010
sdhci_pci0-slot0: Argument: 0x049868c8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39439142912, length=8192)]error = 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000010
sdhci_pci0-slot0: Argument: 0x01f232d8 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=16682168320, length=8192)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
g_vfs_done():mmcsd0p2[READ(offset=39437803520, length=512)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000028
sdhci_pci0-slot0: Argument: 0x04e6aa80 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=42065002496, length=20480)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
mmcsd0: Setting erase start position failed Timeout
sdhci_pci0-slot0: Got AutoCMD12 error 0x0000, but there is no active command.
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x04877000 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000002
sdhci_pci0-slot0: Argument: 0x04985e98 | Trn mode: 0x00000037
sdhci_pci0-slot0: Present:  0x1fef0000 | Host ctl: 0x00000025
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x00000007 | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x05ff003b | Sig enab: 0x05ff003b
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
g_vfs_done():mmcsd0p2[READ(offset=39437807616, length=1024)]error = 5
vnode_pager_generic_getpages_done: I/O read error 5
g_vfs_done():mmcsd0p2[WRITE(offset=18382323712, length=32768)]error = 5
==================================================
pciconf -lv
==================================================
hostb0@pci0:0:0:0:	class=0x060000 card=0x20658086 chip=0x190c8086 rev=0x08 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:	class=0x030000 card=0x20658086 chip=0x191e8086 rev=0x07 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'HD Graphics 515'
    class      = display
    subclass   = VGA
xhci0@pci0:0:20:0:	class=0x0c0330 card=0x20658086 chip=0x9d2f8086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP USB 3.0 xHCI Controller'
    class      = serial bus
    subclass   = USB
none0@pci0:0:20:2:	class=0x118000 card=0x20658086 chip=0x9d318086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP Thermal subsystem'
    class      = dasp
none1@pci0:0:21:0:	class=0x118000 card=0x20658086 chip=0x9d608086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP Serial IO I2C Controller'
    class      = dasp
none2@pci0:0:21:1:	class=0x118000 card=0x20658086 chip=0x9d618086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP Serial IO I2C Controller'
    class      = dasp
none3@pci0:0:22:0:	class=0x078000 card=0x20658086 chip=0x9d3a8086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP CSME HECI'
    class      = simple comms
pcib1@pci0:0:28:0:	class=0x060400 card=0x20658086 chip=0x9d108086 rev=0xf1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP PCI Express Root Port'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:2:	class=0x060400 card=0x20658086 chip=0x9d128086 rev=0xf1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP PCI Express Root Port'
    class      = bridge
    subclass   = PCI-PCI
none4@pci0:0:30:0:	class=0x118000 card=0x20658086 chip=0x9d278086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP Serial IO UART Controller'
    class      = dasp
sdhci_pci0@pci0:0:30:4:	class=0x080501 card=0x20658086 chip=0x9d2b8086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = base peripheral
    subclass   = SD host controller
sdhci_pci1@pci0:0:30:6:	class=0x080501 card=0x20658086 chip=0x9d2d8086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP Secure Digital IO Controller'
    class      = base peripheral
    subclass   = SD host controller
isab0@pci0:0:31:0:	class=0x060100 card=0x20658086 chip=0x9d468086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = bridge
    subclass   = PCI-ISA
none5@pci0:0:31:2:	class=0x058000 card=0x20658086 chip=0x9d218086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP PMC'
    class      = memory
hdac0@pci0:0:31:3:	class=0x040300 card=0x20658086 chip=0x9d708086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP HD Audio'
    class      = multimedia
    subclass   = HDA
none6@pci0:0:31:4:	class=0x0c0500 card=0x20658086 chip=0x9d238086 rev=0x21 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Sunrise Point-LP SMBus'
    class      = serial bus
    subclass   = SMBus
iwm0@pci0:2:0:0:	class=0x028000 card=0x90108086 chip=0x24f38086 rev=0x3a hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wireless 8260'
    class      = network
==================================================
dmesg (boot_verbose=1)
==================================================
Table 'FACP' at 0x872579a8
Table 'APIC' at 0x87257ab8
APIC: Found table at 0x87257ab8
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 4: enabled
SMP: Added CPU 3 (AP)
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
Table 'FACP' at 0x872579a8
Table 'APIC' at 0x87257ab8
Table 'FPDT' at 0x87257b40
Table 'FIDT' at 0x87257b88
Table 'MCFG' at 0x87257c28
Table 'HPET' at 0x87257c68
Table 'SSDT' at 0x87257ca0
Table 'LPIT' at 0x87258138
Table 'SSDT' at 0x872581d0
Table 'SSDT' at 0x87258418
Table 'SSDT' at 0x8725afc8
Table 'DBGP' at 0x8725bbb0
Table 'DBG2' at 0x8725bbe8
Table 'SSDT' at 0x8725bc40
Table 'SSDT' at 0x8725c270
Table 'UEFI' at 0x872616e0
Table 'SSDT' at 0x87261728
Table 'DMAR' at 0x872625a0
Table 'TPM2' at 0x872626b8
ACPI: No SRAT table found
PPIM 0: PA=0xa0000, VA=0xffffffff82610000, size=0x10000, mode=0
VT(vga): resolution 640x480
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff824a4000.
Preloaded boot_entropy_cache "/boot/entropy" at 0xffffffff824ad048.
Preloaded elf obj module "/boot/kernel/coretemp.ko" at 0xffffffff824ad0a0.
Preloaded elf obj module "/boot/kernel/if_iwm.ko" at 0xffffffff824ad650.
Preloaded elf obj module "/boot/kernel/iwm8000Cfw.ko" at 0xffffffff824adc38.
Preloaded elf obj module "/boot/kernel/aesni.ko" at 0xffffffff824ae128.
Calibrating TSC clock ... TSC clock: 1512077352 Hz
CPU: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz (1512.08-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406e3  Family=0x6  Model=0x4e  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
        Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
        Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
        Secondary Processor Controls=0x1fbcff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,EPT#VE,XSAVES>
        Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
        Entry Controls=0xda0400
        EPT Features=0x6334141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all>
        VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
  TSC: P-state invariant, performance statistics
Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
Instruction TLB: 2M/4M pages, fully associative, 8 entries
Instruction TLB: 4KByte pages, 8-way set associative, 64 entries
64-Byte prefetching
Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
real memory  = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000002600000 - 0x000000007a554fff, 2012565504 bytes (491349 pages)
0x0000000083c9b000 - 0x0000000086f27fff, 53006336 bytes (12941 pages)
0x0000000087fff000 - 0x0000000087ffffff, 4096 bytes (1 pages)
0x0000000100000000 - 0x0000000171fe7fff, 1912504320 bytes (466920 pages)
avail memory = 3947098112 (3764 MB)
Table 'FACP' at 0x872579a8
Table 'APIC' at 0x87257ab8
Table 'FPDT' at 0x87257b40
Table 'FIDT' at 0x87257b88
Table 'MCFG' at 0x87257c28
Table 'HPET' at 0x87257c68
Table 'SSDT' at 0x87257ca0
Table 'LPIT' at 0x87258138
Table 'SSDT' at 0x872581d0
Table 'SSDT' at 0x87258418
Table 'SSDT' at 0x8725afc8
Table 'DBGP' at 0x8725bbb0
Table 'DBG2' at 0x8725bbe8
Table 'SSDT' at 0x8725bc40
Table 'SSDT' at 0x8725c270
Table 'UEFI' at 0x872616e0
Table 'SSDT' at 0x87261728
Table 'DMAR' at 0x872625a0
DMAR: Found table at 0x872625a0
x2APIC available but disabled by DMAR table
Event timer "LAPIC" quality 600
LAPIC: ipi_wait() us multiplier 4 (r 35330735 tsc 1512077352)
ACPI APIC Table: <INTEL  CCSKLm30>
Package ID shift: 4
L3 cache ID shift: 4
L2 cache ID shift: 1
L1 cache ID shift: 1
Core ID shift: 1
INTR: Adding local APIC 2 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
Package HW ID = 0 (0)
	Core HW ID = 0 (0)
		CPU0 (BSP): APIC ID: 0 (0)
		CPU1 (AP/HT): APIC ID: 1 (0x1)
	Core HW ID = 1 (0x1)
		CPU2 (AP): APIC ID: 2 (0x2)
		CPU3 (AP/HT): APIC ID: 3 (0x3)
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x098000-0x098fff at 0xfffffe0111b42000
x86bios: EBDA 0x09d000-0x09ffff at 0xfffff8000009d000
x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
lapic0: CMCI unmasked
Pentium Pro MTRR support enabled
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0x00000000000F05B0 000024 (v02 INTEL )
ACPI: XSDT 0x00000000872350A0 0000BC (v01 INTEL  CCSKLm30 0000003A AMI  00010013)
ACPI: FACP 0x00000000872579A8 00010C (v05 INTEL  CCSKLm30 0000003A AMI  00010013)
ACPI: DSDT 0x00000000872351E8 0227B9 (v02 INTEL  CCSKLm30 0000003A INTL 20120913)
ACPI: FACS 0x0000000087B54F80 000040
ACPI: APIC 0x0000000087257AB8 000084 (v03 INTEL  CCSKLm30 0000003A AMI  00010013)
ACPI: FPDT 0x0000000087257B40 000044 (v01 INTEL  CCSKLm30 0000003A AMI  00010013)
ACPI: FIDT 0x0000000087257B88 00009C (v01 INTEL  CCSKLm30 0000003A AMI  00010013)
ACPI: MCFG 0x0000000087257C28 00003C (v01 INTEL  CCSKLm30 0000003A MSFT 00000097)
ACPI: HPET 0x0000000087257C68 000038 (v01 INTEL  CCSKLm30 0000003A AMI. 0005000B)
ACPI: SSDT 0x0000000087257CA0 000495 (v01 INTEL  CCSKLm30 0000003A INTL 20120913)
ACPI: LPIT 0x0000000087258138 000094 (v01 INTEL  CCSKLm30 0000003A MSFT 0000005F)
ACPI: SSDT 0x00000000872581D0 000248 (v02 INTEL  CCSKLm30 0000003A INTL 20120913)
ACPI: SSDT 0x0000000087258418 002BAE (v02 INTEL  CCSKLm30 0000003A INTL 20120913)
ACPI: SSDT 0x000000008725AFC8 000BE3 (v02 INTEL  CCSKLm30 0000003A INTL 20120913)
ACPI: DBGP 0x000000008725BBB0 000034 (v01 INTEL  CCSKLm30 0000003A MSFT 0000005F)
ACPI: DBG2 0x000000008725BBE8 000054 (v00 INTEL  CCSKLm30 0000003A MSFT 0000005F)
ACPI: SSDT 0x000000008725BC40 00062E (v02 INTEL  CCSKLm30 0000003A INTL 20120913)
ACPI: SSDT 0x000000008725C270 00546C (v02 INTEL  CCSKLm30 0000003A INTL 20120913)
ACPI: UEFI 0x00000000872616E0 000042 (v01 INTEL  CCSKLm30 0000003A      00000000)
ACPI: SSDT 0x0000000087261728 000E73 (v02 INTEL  CCSKLm30 0000003A INTL 20120913)
ACPI: DMAR 0x00000000872625A0 000114 (v01 INTEL  CCSKLm30 0000003A INTL 00000001)
ACPI: TPM2 0x00000000872626B8 000034 (v03 INTEL  CCSKLm30 0000003A AMI  00000000)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: ver 0x20 maxredir 0x77
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-119 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
  timer: 0x000300ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000100f2
lapic3: CMCI unmasked
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x03000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x02000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff x2APIC: 0
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000100f2
SMP: passed TSC synchronization test
Timecounter "TSC" frequency 1512077352 Hz quality 1000
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
random: entropy device external interface
firmware: 'iwm8000Cfw' version 0: 2120860 bytes loaded at 0xffffffff822920b8
kbd0 at kbdmux0
mem: <memory>
nfslock: pseudo-device
crypto: <crypto core>
netmap: loaded module
null: <full device, null device, zero device>
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
io: <I/O>
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
hptnr: R750/DC7280 controller driver v1.1.5
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
hpt27xx: RocketRAID 27xx controller driver v1.2.8
nexus0
vtvga0: <VT VGA driver> on motherboard
random: harvesting attach, 8 bytes (4 bits) from vtvga0
random: harvesting attach, 8 bytes (4 bits) from ram0
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
crypto: assign aesni0 driver id 1, flags 83886080
crypto: aesni0 registers alg 11 flags 0 maxoplen 0
crypto: aesni0 registers alg 23 flags 0 maxoplen 0
crypto: aesni0 registers alg 25 flags 0 maxoplen 0
crypto: aesni0 registers alg 26 flags 0 maxoplen 0
crypto: aesni0 registers alg 27 flags 0 maxoplen 0
crypto: aesni0 registers alg 28 flags 0 maxoplen 0
crypto: aesni0 registers alg 22 flags 0 maxoplen 0
random: harvesting attach, 8 bytes (4 bits) from aesni0
acpi0: <INTEL CCSKLm30> on motherboard
ACPI: Executed 21 blocks of module-level executable AML code
Firmware Error (ACPI): Failure looking up [\134_SB.PCI0.SAT1], AE_NOT_FOUND (20171214/dswload-328)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20171214/psobject-371)
ACPI Error: AE_NOT_FOUND, (SSDT:CCSKLm30) while loading table (20171214/tbxfload-355)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI Error: 1 table load failures, 7 successful (20171214/tbxfload-378)
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xfffffe0111bed000 pa 0x99000
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource0
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource1
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource2
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource3
random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource4
cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF80003CAA800 000492 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
cpu0: switching to generic Cx mode
random: harvesting attach, 8 bytes (4 bits) from cpu0
cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 2
cpu1: <ACPI CPU> on acpi0
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFF80003CAA000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
random: harvesting attach, 8 bytes (4 bits) from cpu1
cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 1
cpu2: <ACPI CPU> on acpi0
random: harvesting attach, 8 bytes (4 bits) from cpu2
cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 3
cpu3: <ACPI CPU> on acpi0
random: harvesting attach, 8 bytes (4 bits) from cpu3
ACPI: Processor \134_PR_.CPU4 (ACPI ID 5) ignored
ACPI: Processor \134_PR_.CPU5 (ACPI ID 6) ignored
ACPI: Processor \134_PR_.CPU6 (ACPI ID 7) ignored
ACPI: Processor \134_PR_.CPU7 (ACPI ID 8) ignored
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 24000000Hz 64bit, 8 timers, legacy route
hpet0:  t0: irqs 0x00f00000 (0), MSI, 64bit, periodic
hpet0:  t1: irqs 0x00f00000 (0), MSI
hpet0:  t2: irqs 0x00f00800 (0), MSI
hpet0:  t3: irqs 0x00f01000 (0), MSI
hpet0:  t4: irqs 0x00000000 (0), MSI
hpet0:  t5: irqs 0x00000000 (0), MSI
hpet0:  t6: irqs 0x00000000 (0), MSI
hpet0:  t7: irqs 0x00000000 (0), MSI
Timecounter "HPET" frequency 24000000 Hz quality 950
msi: routing MSI-X IRQ 256 to local APIC 2 vector 48
msi: routing MSI-X IRQ 257 to local APIC 0 vector 49
msi: routing MSI-X IRQ 258 to local APIC 2 vector 49
msi: routing MSI-X IRQ 259 to local APIC 0 vector 50
msi: routing MSI-X IRQ 260 to local APIC 2 vector 50
msi: routing MSI-X IRQ 261 to local APIC 0 vector 51
msi: routing MSI-X IRQ 262 to local APIC 2 vector 51
msi: routing MSI-X IRQ 263 to local APIC 0 vector 52
msi: Assigning MSI-X IRQ 256 to local APIC 0 vector 53
msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 48
msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 48
msi: Assigning MSI-X IRQ 260 to local APIC 0 vector 49
msi: Assigning MSI-X IRQ 262 to local APIC 0 vector 50
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
random: harvesting attach, 8 bytes (4 bits) from hpet0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 48
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 54
Event timer "RTC" frequency 32768 Hz quality 0
random: harvesting attach, 8 bytes (4 bits) from atrtc0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 55
Event timer "i8254" frequency 1193182 Hz quality 100
random: harvesting attach, 8 bytes (4 bits) from attimer0
ACPI timer: 1/2 1/1 1/2 1/1 1/2 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_timer0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link0
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link1
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link2
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link3
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link4
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link5
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link6
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
random: harvesting attach, 8 bytes (4 bits) from pci_link7
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 5 range 0-0xfe
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0x8d000000-0xdfffffff
pcib0: decoding 3 range 0xfd000000-0xfe7fffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x190c, revid=0x08
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x191e, revid=0x07
	domain=0, bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xde000000, size 24, enabled
pcib0: allocated type 3 (0xde000000-0xdeffffff) for rid 10 of pci0:0:2:0
	map[18]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 18 of pci0:0:2:0
	map[20]: type I/O Port, range 32, base 0xf000, size  6, enabled
pcib0: allocated type 4 (0xf000-0xf03f) for rid 20 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x9d2f, revid=0x21
	domain=0, bus=0, slot=20, func=0
	class=0c-03-30, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xdf110000, size 16, enabled
pcib0: allocated type 3 (0xdf110000-0xdf11ffff) for rid 10 of pci0:0:20:0
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x9d31, revid=0x21
	domain=0, bus=0, slot=20, func=2
	class=11-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xdf12f000, size 12, enabled
pcib0: allocated type 3 (0xdf12f000-0xdf12ffff) for rid 10 of pci0:0:20:2
pcib0: matched entry for 0.20.INTC
pcib0: slot 20 INTC hardwired to IRQ 18
pci0:0:21:0: Transition from D3 to D0
found->	vendor=0x8086, dev=0x9d60, revid=0x21
	domain=0, bus=0, slot=21, func=0
	class=11-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xdf12e000, size 12, memory disabled
pcib0: allocated type 3 (0xdf12e000-0xdf12efff) for rid 10 of pci0:0:21:0
pcib0: matched entry for 0.21.INTA
pcib0: slot 21 INTA hardwired to IRQ 16
pci0:0:21:1: Transition from D3 to D0
found->	vendor=0x8086, dev=0x9d61, revid=0x21
	domain=0, bus=0, slot=21, func=1
	class=11-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 3  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xdf12d000, size 12, memory disabled
pcib0: allocated type 3 (0xdf12d000-0xdf12dfff) for rid 10 of pci0:0:21:1
pcib0: matched entry for 0.21.INTB
pcib0: slot 21 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x9d3a, revid=0x21
	domain=0, bus=0, slot=22, func=0
	class=07-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xdf12c000, size 12, memory disabled
pcib0: allocated type 3 (0xdf12c000-0xdf12cfff) for rid 10 of pci0:0:22:0
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x9d10, revid=0xf1
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
	secbus=1, subbus=1
found->	vendor=0x8086, dev=0x9d12, revid=0xf1
	domain=0, bus=0, slot=28, func=2
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
	secbus=2, subbus=2
pci0:0:30:0: Transition from D3 to D0
found->	vendor=0x8086, dev=0x9d27, revid=0x21
	domain=0, bus=0, slot=30, func=0
	class=11-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xdf12b000, size 12, memory disabled
pcib0: allocated type 3 (0xdf12b000-0xdf12bfff) for rid 10 of pci0:0:30:0
pcib0: matched entry for 0.30.INTA
pcib0: slot 30 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x9d2b, revid=0x21
	domain=0, bus=0, slot=30, func=4
	class=08-05-01, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 3  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xdf12a000, size 12, enabled
pcib0: allocated type 3 (0xdf12a000-0xdf12afff) for rid 10 of pci0:0:30:4
pcib0: matched entry for 0.30.INTB
pcib0: slot 30 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x9d2d, revid=0x21
	domain=0, bus=0, slot=30, func=6
	class=08-05-01, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 3  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xdf129000, size 12, enabled
pcib0: allocated type 3 (0xdf129000-0xdf129fff) for rid 10 of pci0:0:30:6
pcib0: matched entry for 0.30.INTD
pcib0: slot 30 INTD hardwired to IRQ 23
found->	vendor=0x8086, dev=0x9d46, revid=0x21
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x9d21, revid=0x21
	domain=0, bus=0, slot=31, func=2
	class=05-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type Memory, range 32, base 0xdf124000, size 14, enabled
pcib0: allocated type 3 (0xdf124000-0xdf127fff) for rid 10 of pci0:0:31:2
found->	vendor=0x8086, dev=0x9d70, revid=0x21
	domain=0, bus=0, slot=31, func=3
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xdf120000, size 14, enabled
pcib0: allocated type 3 (0xdf120000-0xdf123fff) for rid 10 of pci0:0:31:3
	map[20]: type Memory, range 64, base 0xdf100000, size 16, enabled
pcib0: allocated type 3 (0xdf100000-0xdf10ffff) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x9d23, revid=0x21
	domain=0, bus=0, slot=31, func=4
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type Memory, range 64, base 0xdf128000, size  8, enabled
pcib0: allocated type 3 (0xdf128000-0xdf1280ff) for rid 10 of pci0:0:31:4
	map[20]: type I/O Port, range 32, base 0xf040, size  5, enabled
pcib0: allocated type 4 (0xf040-0xf05f) for rid 20 of pci0:0:31:4
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
random: harvesting attach, 8 bytes (4 bits) from hostb0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
random: harvesting attach, 8 bytes (4 bits) from vgapci0
xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xdf110000-0xdf11ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 264 to local APIC 2 vector 48
xhci0: using IRQ 264 for MSI
xhci0: MSI enabled
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
xhci0: usbpf: Attached
random: harvesting attach, 8 bytes (4 bits) from usbus0
usbus0: random: harvesting attach, 8 bytes (4 bits) from xhci0
5.0Gbps Super Speed USB v3.0
pci0: <dasp> at device 20.2 (no driver attached)
pci0: <dasp> at device 21.0 (no driver attached)
pci0: <dasp> at device 21.1 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 265 to local APIC 0 vector 56
pcib1: using IRQ 265 for MSI
pcib1: [GIANT-LOCKED]
pcib1: HotPlug command: 0000 -> 1028
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
random: harvesting attach, 8 bytes (4 bits) from pcib1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib0: allocated type 3 (0xdf000000-0xdf0fffff) for rid 20 of pcib2
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   memory decode     0xdf000000-0xdf0fffff
pci1: <ACPI PCI bus> on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci1
pci1: domain=0, physical bus=2
found->	vendor=0x8086, dev=0x24f3, revid=0x3a
	domain=0, bus=2, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xdf000000, size 13, enabled
pcib2: allocated memory range (0xdf000000-0xdf001fff) for rid 10 of pci0:2:0:0
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 18
iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xdf000000-0xdf001fff irq 18 at device 0.0 on pci1
iwm0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 266 to local APIC 2 vector 50
iwm0: using IRQ 266 for MSI
random: harvesting attach, 8 bytes (4 bits) from iwm0
random: harvesting attach, 8 bytes (4 bits) from pci1
random: harvesting attach, 8 bytes (4 bits) from pcib2
pci0: <dasp> at device 30.0 (no driver attached)
sdhci_pci0: <Generic SD HCI> mem 0xdf12a000-0xdf12afff irq 21 at device 30.4 on pci0
sdhci_pci0-slot0: 200MHz HS 8bits VDD: 1.8V VCCQ: 3.3V 1.8V DRV: B DMA embedded
sdhci_pci0-slot0: eMMC: HS200
sdhci_pci0-slot0: UHS-I: SDR12 SDR25 SDR50 SDR104 DDR50
sdhci_pci0-slot0: Re-tuning count 128 secs, mode 1
sdhci_pci0-slot0: ============== REGISTER DUMP ==============
sdhci_pci0-slot0: Sys addr: 0x00000280 | Version:  0x00001002
sdhci_pci0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000000
sdhci_pci0-slot0: Argument: 0x00020000 | Trn mode: 0x00000000
sdhci_pci0-slot0: Present:  0x1fff0000 | Host ctl: 0x00000034
sdhci_pci0-slot0: Power:    0x0000000b | Blk gap:  0x00000080
sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000007
sdhci_pci0-slot0: Timeout:  0x0000000e | Int stat: 0x00000000
sdhci_pci0-slot0: Int enab: 0x03ff00ff | Sig enab: 0x02ff00ff
sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x0000008b
sdhci_pci0-slot0: Caps:     0x546ec881 | Caps2:    0x80000807
sdhci_pci0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci0-slot0: ADMA addr:0x87c40008 | Slot int: 0x00000000
sdhci_pci0-slot0: ===========================================
sdhci_pci0: 1 slot(s) allocated
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 57
sdhci_pci0-slot0: Card inserted
mmc0: <MMC/SD bus> on sdhci_pci0
random: harvesting attach, 8 bytes (4 bits) from mmc0
random: harvesting attach, 8 bytes (4 bits) from sdhci_pci0
sdhci_pci1: <Generic SD HCI> mem 0xdf129000-0xdf129fff irq 23 at device 30.6 on pci0
sdhci_pci1-slot0: 200MHz HS 4bits VDD: 3.3V 1.8V VCCQ: 3.3V 1.8V DRV: B DMA embedded
sdhci_pci1-slot0: eMMC: HS200
sdhci_pci1-slot0: UHS-I: SDR12 SDR25 SDR50 SDR104 DDR50
sdhci_pci1-slot0: Re-tuning count 128 secs, mode 1
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0000 | Host ctl: 0x00000000
sdhci_pci1-slot0: Power:    0x00000000 | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x00000000
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x00000000 | Sig enab: 0x00000000
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1: 1 slot(s) allocated
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 51
sdhci_pci1-slot0: Card inserted
mmc1: <MMC/SD bus> on sdhci_pci1
random: harvesting attach, 8 bytes (4 bits) from mmc1
random: harvesting attach, 8 bytes (4 bits) from sdhci_pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
random: harvesting attach, 8 bytes (4 bits) from isa0
random: harvesting attach, 8 bytes (4 bits) from isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xdf120000-0xdf123fff,0xdf100000-0xdf10ffff irq 16 at device 31.3 on pci0
hdac0: PCI card vendor: 0x8086, device: 0x2065
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 267 to local APIC 0 vector 58
hdac0: using IRQ 267 for MSI
hdac0: Caps: OSS 9, ISS 7, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
random: harvesting attach, 8 bytes (4 bits) from hdac0
pci0: <serial bus, SMBus> at device 31.4 (no driver attached)
random: harvesting attach, 8 bytes (4 bits) from pci0
random: harvesting attach, 8 bytes (4 bits) from pcib0
acpi_button0: <Sleep Button> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_button0
acpi_button1: <Power Button> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_button1
acpi_tz0: <Thermal Zone> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_tz0
acpi_tz1: <Thermal Zone> on acpi0
random: harvesting attach, 8 bytes (4 bits) from acpi_tz1
ACPI: Enabled 5 GPEs in block 00 to 7F
random: harvesting attach, 8 bytes (4 bits) from acpi0
random: harvesting attach, 8 bytes (4 bits) from apic0
random: harvesting attach, 8 bytes (4 bits) from nexus0
ahc_isa_identify 0: ioport 0xc00 alloc failed
ahc_isa_identify 1: ioport 0x1c00 alloc failed
ahc_isa_identify 2: ioport 0x2c00 alloc failed
ahc_isa_identify 3: ioport 0x3c00 alloc failed
ahc_isa_identify 4: ioport 0x4c00 alloc failed
ahc_isa_identify 5: ioport 0x5c00 alloc failed
ahc_isa_identify 6: ioport 0x6c00 alloc failed
ahc_isa_identify 7: ioport 0x7c00 alloc failed
ahc_isa_identify 8: ioport 0x8c00 alloc failed
ahc_isa_identify 9: ioport 0x9c00 alloc failed
ahc_isa_identify 10: ioport 0xac00 alloc failed
ahc_isa_identify 11: ioport 0xbc00 alloc failed
ahc_isa_identify 12: ioport 0xcc00 alloc failed
ahc_isa_identify 13: ioport 0xdc00 alloc failed
ahc_isa_identify 14: ioport 0xec00 alloc failed
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
random: harvesting attach, 8 bytes (4 bits) from orm0
sc0 failed to probe on isa0
vga0 failed to probe on isa0
pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
atkbdc0: AT keyboard controller not found
atkbdc0 failed to probe at port 0x60,0x64 on isa0
pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1
uart1 failed to probe at port 0x2f8 irq 3 on isa0
isa_probe_children: probing PnP devices
AcpiOsExecute: task queue not started
random: harvesting attach, 8 bytes (4 bits) from acpi_perf0
AcpiOsExecute: task queue not started
random: harvesting attach, 8 bytes (4 bits) from acpi_perf1
AcpiOsExecute: task queue not started
random: harvesting attach, 8 bytes (4 bits) from acpi_perf2
AcpiOsExecute: task queue not started
random: harvesting attach, 8 bytes (4 bits) from acpi_perf3
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Setting TjMax=100
random: harvesting attach, 8 bytes (4 bits) from coretemp0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
random: harvesting attach, 8 bytes (4 bits) from cpufreq0
random: harvesting attach, 8 bytes (4 bits) from est0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Setting TjMax=100
random: harvesting attach, 8 bytes (4 bits) from coretemp1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
random: harvesting attach, 8 bytes (4 bits) from cpufreq1
random: harvesting attach, 8 bytes (4 bits) from est1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp2: Setting TjMax=100
random: harvesting attach, 8 bytes (4 bits) from coretemp2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
random: harvesting attach, 8 bytes (4 bits) from cpufreq2
random: harvesting attach, 8 bytes (4 bits) from est2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp3: Setting TjMax=100
random: harvesting attach, 8 bytes (4 bits) from coretemp3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
random: harvesting attach, 8 bytes (4 bits) from cpufreq3
random: harvesting attach, 8 bytes (4 bits) from est3
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 12000620 Hz
lapic: deadline tsc mode, Frequency 1512077352 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768
IPsec: Initialized Security Association Processing.
AcpiOsExecute: enqueue 4 pending tasks
hptnr: no controller detected.
hptrr: no controller detected.
hpt27xx: no controller detected.
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
iwm0: hw rev 0x200, fw ver 22.361476.0, address a0:c5:89:54:f0:ec
iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
mmc0: Probing bus
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
mmc0: SD probe: failed
mmc0: MMC probe: OK (OCR: 0x00ff8080)
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
mmc0: Current OCR: 0x00ff8080
mmc0: Probing cards
mmc0: New card detected (CID 7001004d3532353634010edda54b9300)
mmc0: New card detected (CSD d04f01320f5903ffffffffff8a400000)
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
mmc0: Card at relative address 0x0002 added:
mmc0:  card: MMCHC M52564 0.1 SN 0EDDA54B MFG 09/2016 by 112 0x0000
mmc0:  quirks: 0
mmc0:  bus: 8bit, 200MHz (HS400 timing)
mmc0:  memory: 119537664 blocks, erase sector 65536 blocks
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
mmc0: setting transfer rate to 200.000MHz (HS200 timing)
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
sdhci_pci0-slot0: Divider 250 for freq 400000 (base 200000000)
sdhci_pci0-slot0: Divider 0 for freq 200000000 (base 200000000)
sdhci_pci0-slot0: Divider 0 for freq 200000000 (base 200000000)
mmcsd0: taking advantage of TRIM
mmcsd0: 61GB <MMCHC M52564 0.1 SN 0EDDA54B MFG 09/2016 by 112 0x0000> at mmc0 200.0MHz/8bit/8192-block
GEOM: new disk mmcsd0
mmcsd0boot0: 4MB partion 1 at mmcsd0
mmcsd0boot1: 4MB partion 2 at mmcsd0
mmcsd0rpmb: 4MB partion 3 at mmcsd0
random: harvesting attach, 8 bytes (4 bits) from mmcsd0
sdhci_pci1-slot0: Bus power failed to enablesdhci_pci1-slot0: GEOM: new disk mmcsd0boot0
Divider 250 for freq 400000 (base 200000000)
sdhci_pci1-slot0: GEOM: new disk mmcsd0boot1
Divider 250 for freq 400000 (base 200000000)
mmc1: Probing bus
sdhci_pci1-slot0: Divider 250 for freq 400000 (base 200000000)
uhub0: 18 ports with 18 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub0
ugen0.2: <VIA Labs, Inc. USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/60.01, addr 1> on usbus0
uhub1: 4 ports with 4 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub1
ugen0.3: <VIA Labs, Inc. USB2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/b.e0, addr 2> on usbus0
uhub2: 4 ports with 4 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub2
ugen0.4: <Razer Razer Imperator> at usbus0
ukbd0 on uhub2
ukbd0: <Razer Razer Imperator, class 0/0, rev 2.00/2.00, addr 3> on usbus0
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
random: harvesting attach, 8 bytes (4 bits) from ukbd0
ugen0.5: <vendor 0x04d9 USB-HID Keyboard> at usbus0
ukbd1 on uhub2
ukbd1: <vendor 0x04d9 USB-HID Keyboard, class 0/0, rev 1.10/1.07, addr 4> on usbus0
kbd2 at ukbd1
kbd2: ukbd1, generic (0), config:0x0, flags:0x3d0000
random: harvesting attach, 8 bytes (4 bits) from ukbd1
ugen0.6: <vendor 0x8087 product 0x0a2b> at usbus0
ugen0.7: <VIA Labs, Inc. USB3.0 Hub> at usbus0
uhub3 on uhub0
uhub3: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/60.01, addr 6> on usbus0
uhub3: 4 ports with 4 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub3
ugen0.8: <VIA Labs, Inc. USB3.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/b.e1, addr 7> on usbus0
uhub4: 4 ports with 4 removable, self powered
random: harvesting attach, 8 bytes (4 bits) from uhub4
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
ugen0.9: <Realtek USB 101001000 LAN> at usbus0
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Divider 250 for freq 400000 (base 200000000)
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
mmc1: SD probe: failed
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
sdhci_pci1-slot0: Controller timeout
sdhci_pci1-slot0: ============== REGISTER DUMP ==============
sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00001002
sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_pci1-slot0: Present:  0x000a0001 | Host ctl: 0x00000001
sdhci_pci1-slot0: Power:    0x0000000e | Blk gap:  0x00000080
sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
sdhci_pci1-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003b
sdhci_pci1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_pci1-slot0: Caps:     0x7568c881 | Caps2:    0x00000807
sdhci_pci1-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_pci1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_pci1-slot0: ===========================================
mmc1: MMC probe: failed
mmc1: Current OCR: 0x00000000
mmc1: No compatible cards found on bus
hdacc0: <Intel Skylake HDA CODEC> at cad 2 on hdac0
hdaa0: <Intel Skylake Audio Function Group> at nid 1 on hdacc0
hdaa0: Subsystem ID: 0x80860101
hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
hdaa0: Original pins configuration:
hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
hdaa0:  3 18560010 1  0  Digital-out   Jack  Digital 0x18       Unknown 0
hdaa0: Patched pins configuration:
hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
hdaa0:  3 18560010 1  0  Digital-out   Jack  Digital 0x18       Unknown 0
hdaa0: 1 associations found:
hdaa0: Association 0 (1) out:
hdaa0:  Pin nid=3 seq=0
hdaa0: Tracing association 0 (1)
hdaa0:  Pin 3 traced to DAC 2
hdaa0: Association 0 (1) trace succeeded
hdaa0: Looking for additional DAC for association 0 (1)
hdaa0: Tracing input monitor
hdaa0: Tracing other input monitors
hdaa0: Tracing beeper
hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm0: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa0
pcm0: Playback:
pcm0:      Stream cap: 0x00000005 AC3 PCM
pcm0:         PCM cap: 0x001a07f0 16 24 32 bits, 32 44 48 88 96 176 192 KHz
pcm0:             DAC: 2
pcm0: 
pcm0:     nid=3 [pin: Digital-out (Jack)]
pcm0:       + <- nid=2 [audio output] [src: pcm]
pcm0: 
pcm0: Master Volume (OSS: vol): 0/0dB
pcm0:    +- ctl  1 (nid   3 in ):    mute
pcm0: 
pcm0: PCM Volume (OSS: pcm): 0/0dB
pcm0:    +- ctl  1 (nid   3 in ):    mute
pcm0: 
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Soft PCM mixer ENABLED
pcm0: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
random: harvesting attach, 8 bytes (4 bits) from pcm0
random: harvesting attach, 8 bytes (4 bits) from hdaa0
random: harvesting attach, 8 bytes (4 bits) from hdacc0
random: unblocking device.
Trying to mount root from ufs:/dev/mmcsd0p2 [rw]...
atrtc0: providing initial system time
start_init: trying /sbin/init
wlan0: bpf attached
wlan0: bpf attached
wlan0: Ethernet address: a0:c5:89:54:f0:ec
ums0 on uhub2
ums0: <Razer Razer Imperator, class 0/0, rev 2.00/2.00, addr 3> on usbus0
ums0: 8 buttons and [XYZ] coordinates ID=0
random: harvesting attach, 8 bytes (4 bits) from ums0
uhid0 on uhub2
uhid0: <vendor 0x04d9 USB-HID Keyboard, class 0/0, rev 1.10/1.07, addr 4> on usbus0
random: harvesting attach, 8 bytes (4 bits) from uhid0
uhid1 on uhub2
uhid1: <vendor 0x04d9 USB-HID Keyboard, class 0/0, rev 1.10/1.07, addr 4> on usbus0
random: harvesting attach, 8 bytes (4 bits) from uhid1
ubt0 on uhub0
ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.01, addr 5> on usbus0
random: harvesting attach, 8 bytes (4 bits) from ubt0
cdce0 on uhub4
cdce0: <CDC Communications Control> on usbus0
random: harvesting attach, 8 bytes (4 bits) from cdce0
ue0: <USB Ethernet> on cdce0
ue0: bpf attached
ue0: Ethernet address: 00:e1:11:00:1d:99
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
pflog0: bpf attached
pflog0: promiscuous mode enabled
cpuctl: access to MSR registers/cpuid info.
CPU: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz (1512.08-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406e3  Family=0x6  Model=0x4e  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
        Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
        Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
        Secondary Processor Controls=0x1fbcff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,EPT#VE,XSAVES>
        Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
        Entry Controls=0xda0400
        EPT Features=0x6334141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all>
        VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
  TSC: P-state invariant, performance statistics
Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
Instruction TLB: 2M/4M pages, fully associative, 8 entries
Instruction TLB: 4KByte pages, 8-way set associative, 64 entries
64-Byte prefetching
Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line