Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.3-RELEASE-p5 #0: Tue Nov 12 08:59:04 UTC 2019
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)
VT(efifb): resolution 800x600
CPU: Intel(R) Core(TM) i3-9100 CPU @ 3.60GHz (3600.17-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x906eb  Family=0x6  Model=0x9e  Stepping=11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0x9c002400<MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 32969355264 (31442 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   AS09   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-119 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1800084430 Hz quality 1000
random: entropy device external interface
kbd0 at kbdmux0
000.000029 [4213] netmap_init               netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff81005f80, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL AS09   > on motherboard
ACPI Error: AE_BAD_PARAMETER, Could not install PciConfig handler for Root Bridge PCI0 (20171214/evrgnini-376)
acpi0: Power Button (fixed)
unknown: memory range not supported
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x2ffe000000-0x2ffeffffff,0x2fa0000000-0x2fafffffff at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Union Point USB 3.0 controller> mem 0x2fff010000-0x2fff01ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xee680000-0xee687fff,0xee68c000-0xee68c0ff,0xee600000-0xee67ffff at device 23.0 on pci0
ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xee500000-0xee507fff at device 0.0 on pci2
xhci1: 32 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
alc0: <Killer E2400 Gigabit Ethernet> port 0xe000-0xe07f mem 0xee400000-0xee43ffff at device 0.0 on pci4
alc0: 11776 Tx FIFO, 12032 Rx FIFO
alc0: Using 1 MSIX message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
alc0: Using defaults for TSO: 65518/35/2048
alc0: Ethernet address: 00:4e:01:b0:92:34
pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib5: [GIANT-LOCKED]
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pcib6: failed to allocate initial I/O port window: 0-0xfff
pcib6: failed to allocate initial memory window: 0-0xfffff
pcib6: failed to allocate initial prefetch window: 0-0xfffff
pci6: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 0.0 on pci6
pcib7: failed to allocate initial I/O port window: 0-0xfff
pcib7: failed to allocate initial memory window: 0-0xfffff
pcib7: failed to allocate initial prefetch window: 0-0xfffff
pci7: <PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 1.0 on pci6
pcib8: failed to allocate initial I/O port window: 0-0xfff
pcib8: failed to allocate initial memory window: 0-0xfffff
pcib8: failed to allocate initial prefetch window: 0-0xfffff
pcib8: [GIANT-LOCKED]
pcib9: <PCI-PCI bridge> at device 2.0 on pci6
pcib9: failed to allocate initial I/O port window: 0-0xfff
pcib9: failed to allocate initial memory window: 0-0xfffff
pcib9: failed to allocate initial prefetch window: 0-0xfffff
pcib9: [GIANT-LOCKED]
pci8: <PCI bus> on pcib9
xhci2: <XHCI (generic) USB 3.0 controller> mem 0xc0000000-0xc000ffff at device 0.0 on pci8
xhci2: 32 bytes context size, 64-bit DMA
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
pcib10: <PCI-PCI bridge> at device 4.0 on pci6
pcib10: failed to allocate initial I/O port window: 0-0xfff
pcib10: failed to allocate initial memory window: 0-0xfffff
pcib10: failed to allocate initial prefetch window: 0-0xfffff
pcib10: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel Kaby Lake-H HDA Controller> mem 0x2fff020000-0x2fff023fff,0x2fff000000-0x2fff00ffff at device 31.3 on pci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC899 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC899 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC899 (Analog 5.1/2.0)> at nid 20,22,21 and 25 on hdaa0
pcm1: <Realtek ALC899 (Front Analog Headphones)> at nid 27 on hdaa0
hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1
ugen2.1: <0x8086 XHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <0x1b21 XHCI root HUB> at usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <ST2000DM008-2FR102 0001> ACS-3 ATA SATA 3.x device
ada0: Serial Number ZFL0Z4ZV
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors)
ada0: quirks=0x1<4K>
Trying to mount root from zfs:zroot/ROOT/default []...
cd0 at ahcich2 bus 0 scbus1 target 0 lun 0
cd0: <PLDS DVD+-RW DU-8A5LH 6D1M> Removable CD-ROM SCSI device
cd0: Serial Number PNDVVPLC0097259XDA00
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Root mount waiting for: usbus2 usbus1 usbus0
uhub2: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub1: 26 ports with 26 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <Generic Flash Card ReaderWriter> at usbus0
umass0 on uhub1
umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.01/1.00, addr 1> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:4:0: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Multiple Card  Reader 1.00> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 058F63666485
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ugen0.3: <Microsoft Microsoft 2.4GHz Transceiver v7.0> at usbus0
ukbd0 on uhub1
ukbd0: <Microsoft Microsoft 2.4GHz Transceiver v7.0, class 0/0, rev 2.00/6.33, addr 2> on usbus0
kbd1 at ukbd0
Root mount waiting for: usbus0
ugen0.4: <vendor 0x0cf3 product 0xe301> at usbus0
random: unblocking device.
lo0: link state changed to UP
alc0: link state changed to DOWN
alc0: link state changed to UP
ums0 on uhub1
ums0: <Microsoft Microsoft 2.4GHz Transceiver v7.0, class 0/0, rev 2.00/6.33, addr 2> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=26
ums0: 0 buttons and [T] coordinates ID=0
uhid0 on uhub1
uhid0: <Microsoft Microsoft 2.4GHz Transceiver v7.0, class 0/0, rev 2.00/6.33, addr 2> on usbus0
ubt0 on uhub1
ubt0: <vendor 0x0cf3 product 0xe301, class 224/1, rev 2.01/0.01, addr 3> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()