reebsd@generic:~ % dmesg ---<>--- Type Physical Virtual #Pages Attr Reserved 000000000000 0 00000002 WB ConventionalMemory 000000002000 2000 00007eee WB ACPIReclaimMemory 000007ef0000 7ef0000 00000020 WB ConventionalMemory 000007f10000 7f10000 00029dea WB BootServicesData 000031cfa000 31cfa000 00000001 WB LoaderData 000031cfb000 31cfb000 00008001 WB LoaderCode 000039cfc000 39cfc000 00000134 WB Reserved 000039e30000 39e30000 00000007 WB BootServicesData 000039e37000 39e37000 00000001 WB RuntimeServicesData 000039e38000 39e38000 00000001 WB RUNTIME BootServicesData 000039e39000 39e39000 00000002 WB Reserved 000039e3b000 39e3b000 00000001 WB RuntimeServicesData 000039e3c000 39e3c000 00000003 WB RUNTIME BootServicesData 000039e3f000 39e3f000 00000001 WB RuntimeServicesData 000039e40000 39e40000 00000004 WB RUNTIME Reserved 000039e44000 39e44000 00000001 WB BootServicesData 000039e45000 39e45000 00000001 WB Reserved 000039e46000 39e46000 00000001 WB BootServicesData 000039e47000 39e47000 00000002 WB Reserved 000039e49000 39e49000 00000001 WB BootServicesData 000039e4a000 39e4a000 00000002 WB LoaderData 000039e4c000 39e4c000 00001404 WB RuntimeServicesCode 00003b250000 3b250000 00000010 WB RUNTIME LoaderData 00003b260000 3b260000 000000a0 WB Reserved 00003ee5c000 3ee5c000 00000001 WB BootServicesData 000040000000 40000000 00040000 WB MemoryMappedIO 0000fe100000 fe100000 00000001 RUNTIME Physical memory chunk(s): 0x00002000 - 0x07eeffff, 126 MB ( 32494 pages) 0x07f10000 - 0x39e2ffff, 799 MB ( 204576 pages) 0x39e37000 - 0x39e3afff, 0 MB ( 4 pages) 0x39e3c000 - 0x39e43fff, 0 MB ( 8 pages) 0x39e45000 - 0x39e45fff, 0 MB ( 1 pages) 0x39e47000 - 0x39e48fff, 0 MB ( 2 pages) 0x39e4a000 - 0x3b24ffff, 20 MB ( 5126 pages) 0x3b260000 - 0x3b2fffff, 0 MB ( 160 pages) 0x40000000 - 0x7fffffff, 1024 MB ( 262144 pages) Excluded memory regions: 0x00000000 - 0x00001fff, 0 MB ( 2 pages) NoAlloc 0x07ef0000 - 0x07f0ffff, 0 MB ( 32 pages) NoAlloc 0x31e00000 - 0x33295fff, 20 MB ( 5270 pages) NoAlloc 0x39e30000 - 0x39e36fff, 0 MB ( 7 pages) NoAlloc 0x39e38000 - 0x39e38fff, 0 MB ( 1 pages) NoAlloc 0x39e3b000 - 0x39e3efff, 0 MB ( 4 pages) NoAlloc 0x39e40000 - 0x39e44fff, 0 MB ( 5 pages) NoAlloc 0x39e46000 - 0x39e46fff, 0 MB ( 1 pages) NoAlloc 0x39e49000 - 0x39e49fff, 0 MB ( 1 pages) NoAlloc 0x3b250000 - 0x3b25ffff, 0 MB ( 16 pages) NoAlloc 0x3e9f1000 - 0x3eaf3fff, 1 MB ( 259 pages) NoAlloc 0x3ee5c000 - 0x3ee5cfff, 0 MB ( 1 pages) NoAlloc NoDump 0xfe100000 - 0xfe100fff, 0 MB ( 1 pages) NoAlloc Found 4 CPUs in the device tree Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 06:06:55 UTC 2021 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) VT(efifb): resolution 592x448 Preloaded elf kernel "/boot/kernel/kernel" at 0xffff000001268000. Preloaded elf module "/boot/kernel/umodem.ko" at 0xffff000001271260. Preloaded elf module "/boot/kernel/ucom.ko" at 0xffff000001271a78. Preloaded hostuuid "/etc/hostid" at 0xffff000001272250. Preloaded boot_entropy_cache "/boot/entropy" at 0xffff0000012722a0. module firmware already present! real memory = 2066493440 (1970 MB) Physical memory chunk(s): 0x00000000002000 - 0x00000007eeffff, 133095424 bytes (32494 pages) 0x00000007f10000 - 0x00000031dfffff, 703528960 bytes (171760 pages) 0x00000033296000 - 0x00000039e2ffff, 112828416 bytes (27546 pages) 0x00000039e37000 - 0x00000039e37fff, 4096 bytes (1 pages) 0x00000039e39000 - 0x00000039e3afff, 8192 bytes (2 pages) 0x00000039e3f000 - 0x00000039e3ffff, 4096 bytes (1 pages) 0x00000039e45000 - 0x00000039e45fff, 4096 bytes (1 pages) 0x00000039e47000 - 0x00000039e48fff, 8192 bytes (2 pages) 0x00000039e4a000 - 0x0000003b24ffff, 20996096 bytes (5126 pages) 0x0000003b260000 - 0x0000003b2fffff, 655360 bytes (160 pages) 0x00000040000000 - 0x0000007cf7efff, 1022881792 bytes (249727 pages) avail memory = 1993416704 (1901 MB) Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: read 4096 bytes from preloaded cache random: unblocking device. VIMAGE (virtualized network stack) enabled hostuuid: using 30303031-3030-3030-3234-386339306430 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 random: entropy device external interface firmware: 'tegra210_xusb_fw' version 0: 132608 bytes loaded at 0xffff000000998168 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 MAP 39e38000 mode 2 pages 1 MAP 39e3c000 mode 2 pages 3 MAP 39e40000 mode 2 pages 4 MAP 3b250000 mode 2 pages 16 MAP fe100000 mode 0 pages 1 null: openfirm: WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0. crypto: WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd0 at kbdmux0 mem: ofwbus0: simplebus0: on ofwbus0 ofw_clkbus0: on ofwbus0 clk_fixed0: on ofw_clkbus0 clk_fixed1: on ofw_clkbus0 clk_fixed2: on ofwbus0 clk_fixed3: on ofwbus0 simplebus1: on ofwbus0 simplebus2: on ofwbus0 regfix0: on ofwbus0 regfix1: on ofwbus0 regfix2: on ofwbus0 simplebus3: on ofwbus0 simple_mfd0: mem 0x7d5d2000-0x7d5d2eff on simplebus0 bcm2835_firmware0: on simplebus0 ofw_clkbus1: on bcm2835_firmware0 psci0: on ofwbus0 psci0: PSCI version 0.2 compatible gic0: mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 30 on simplebus0 gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256 gpio0: mem 0x7e200000-0x7e2000b3 irq 14,15 on simplebus0 gpiobus0: on gpio0 Processing 1 pin-config node(s) in pinctrl-0 for serial@7e201000 Processing 2 pin-config node(s) in pinctrl-0 for spi@7e204000 gpio0: set pin 9 to func 4 gpio0: set pin 10 to func 4 gpio0: set pin 11 to func 4 gpio0: set pin 8 to func 1 gpio0: set pin 7 to func 1 Processing 1 pin-config node(s) in pinctrl-0 for i2c@7e804000 Processing 1 pin-config node(s) in pinctrl-0 for bcm2835_audio gpio0: set pin 40 to func 4 gpio0: set pin 41 to func 4 Processing 1 pin-config node(s) in pinctrl-0 for mmc@7e300000 gpio0: set pin 48 to func 7, pull 0 gpio0: set pin 49 to func 7, pull 2 gpio0: set pin 50 to func 7, pull 2 gpio0: set pin 51 to func 7, pull 2 gpio0: set pin 52 to func 7, pull 2 gpio0: set pin 53 to func 7, pull 2 gpio1: on bcm2835_firmware0 gpiobus1: on gpio1 regfix0: Cannot set GPIO pin: 6 REGNODE_INIT failed: 6 regfix0: Cannot register regulator. mbox0: mem 0x7e00b880-0x7e00b8bf irq 13 on simplebus0 gpioregulator0: on ofwbus0 Checking root against raspberrypi,model-b Checking root against brcm,bcm2835 Checking root against brcm,bcm2709 Checking root against brcm,bcm2836 Checking root against brcm,bcm2837 Checking root against brcm,bcm2711 generic_timer0: irq 4,5,6,7 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000 usb_nop_xceiv0: on ofwbus0 efirtc0: cannot read EFI realtime clock, error 78 ofwbus0: mem 0x3e9f1000-0x3eaf3fff compat simple-framebuffer (no driver attached) simplebus0: mem 0x7e003000-0x7e003fff irq 8,9,10,11 compat brcm,bcm2835-system-timer (no driver attached) simplebus0: mem 0x7e004000-0x7e00401f irq 12 disabled compat brcm,bcm2835-txp (no driver attached) simplebus0: mem 0x7e101000-0x7e102fff compat brcm,bcm2711-cprman (no driver attached) gpioc0: on gpio0 uart0: mem 0x7e201000-0x7e2011ff irq 16 on simplebus0 uart0: console (115200,n,8,1) uart0: fast interrupt uart0: PPS capture mode: DCD simplebus0: mem 0x7e202000-0x7e2020ff irq 17 disabled compat brcm,bcm2835-sdhost (no driver attached) simplebus0: mem 0x7e203000-0x7e203023 disabled compat brcm,bcm2835-i2s (no driver attached) spi0: mem 0x7e204000-0x7e2041ff irq 18 on simplebus0 spibus0: on spi0 spibus0: at cs 0 mode 0 spibus0: at cs 1 mode 0 simplebus0: mem 0x7e205000-0x7e2051ff irq 19 disabled compat brcm,bcm2711-i2c (no driver attached) simplebus0: disabled compat i2c-mux-pinctrl (no driver attached) simplebus0: mem 0x7e208000-0x7e20808b disabled compat brcm,bcm2835-dpi (no driver attached) simplebus0: mem 0x7e209000-0x7e209077 irq 20 disabled compat brcm,bcm2835-dsi0 (no driver attached) simplebus0: mem 0x7e215000-0x7e215007 compat brcm,bcm2835-aux (no driver attached) simplebus0: mem 0x7e215040-0x7e21507f irq 21 disabled compat brcm,bcm2835-aux-uart (no driver attached) simplebus0: mem 0x7e215080-0x7e2150bf irq 22 disabled compat brcm,bcm2835-aux-spi (no driver attached) simplebus0: mem 0x7e2150c0-0x7e2150ff irq 23 disabled compat brcm,bcm2835-aux-spi (no driver attached) simplebus0: mem 0x7e20c000-0x7e20c027 disabled compat brcm,bcm2835-pwm (no driver attached) simplebus0: mem 0x7e400000-0x7e405fff irq 24 disabled compat brcm,bcm2711-hvs (no driver attached) simplebus0: mem 0x7e700000-0x7e70008b irq 25 disabled compat brcm,bcm2711-dsi1 (no driver attached) iichb0: mem 0x7e804000-0x7e804fff irq 26 on simplebus0 simplebus0: mem 0x7e806000-0x7e806fff irq 27 disabled compat brcm,bcm2835-vec (no driver attached) simplebus0: mem 0x7e980000-0x7e98ffff,0x7e00b200-0x7e00b3ff irq 28,29 disabled compat brcm,bcm2708-usb (no driver attached) simplebus0: mem 0x40000000-0x400000ff compat brcm,bcm2836-l1-intc (no driver attached) simple_mfd0: mem 0x7d5d2000-0x7d5d2eff compat brcm,bcm2711-thermal (no driver attached) bcm_dma0: mem 0x7e007000-0x7e007aff irq 31,32,33,34,35,36,37,38,39,40,41 on simplebus0 bcm283x_vcbus: No armc -> vcbus mapping found: 7cd57000 bcmwd0: mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0 simplebus0: mem 0x7e104000-0x7e104027 compat brcm,bcm2711-rng200 (no driver attached) simplebus0: mem 0x7e201400-0x7e2015ff irq 42 disabled compat arm,pl011 (no driver attached) simplebus0: mem 0x7e201600-0x7e2017ff irq 43 disabled compat arm,pl011 (no driver attached) simplebus0: mem 0x7e201800-0x7e2019ff irq 44 disabled compat arm,pl011 (no driver attached) simplebus0: mem 0x7e201a00-0x7e201bff irq 45 disabled compat arm,pl011 (no driver attached) simplebus0: mem 0x7e204600-0x7e2047ff irq 46 disabled compat brcm,bcm2835-spi (no driver attached) simplebus0: mem 0x7e204800-0x7e2049ff irq 47 disabled compat brcm,bcm2835-spi (no driver attached) simplebus0: mem 0x7e204a00-0x7e204bff irq 48 disabled compat brcm,bcm2835-spi (no driver attached) simplebus0: mem 0x7e204c00-0x7e204dff irq 49 disabled compat brcm,bcm2835-spi (no driver attached) simplebus0: mem 0x7e205600-0x7e2057ff irq 50 disabled compat brcm,bcm2711-i2c (no driver attached) simplebus0: mem 0x7e205800-0x7e2059ff irq 51 disabled compat brcm,bcm2711-i2c (no driver attached) simplebus0: mem 0x7e205a00-0x7e205bff irq 52 disabled compat brcm,bcm2711-i2c (no driver attached) simplebus0: mem 0x7e205c00-0x7e205dff irq 53 disabled compat brcm,bcm2711-i2c (no driver attached) simplebus0: mem 0x7e206000-0x7e2060ff irq 54 disabled compat brcm,bcm2711-pixelvalve0 (no driver attached) simplebus0: mem 0x7e207000-0x7e2070ff irq 55 disabled compat brcm,bcm2711-pixelvalve1 (no driver attached) simplebus0: mem 0x7e20a000-0x7e20a0ff irq 56 disabled compat brcm,bcm2711-pixelvalve2 (no driver attached) simplebus0: mem 0x7e20c800-0x7e20c827 disabled compat brcm,bcm2835-pwm (no driver attached) simplebus0: mem 0x7e216000-0x7e2160ff irq 57 disabled compat brcm,bcm2711-pixelvalve4 (no driver attached) simplebus0: mem 0x7ec12000-0x7ec120ff irq 58 disabled compat brcm,bcm2711-pixelvalve3 (no driver attached) simplebus0: mem 0x7ef00000-0x7ef0000f disabled compat brcm,brcm2711-dvp (no driver attached) simplebus0: mem 0x7ef00100-0x7ef0012f irq 59 disabled compat brcm,bcm2711-l2-intc (no driver attached) simplebus0: mem 0x7ef00700-0x7ef009ff,0x7ef00300-0x7ef004ff,0x7ef00f00-0x7ef00f7f,0x7ef00f80-0x7ef00fff,0x7ef01b00-0x7ef01cff,0x7ef01f00-0x7ef022ff,0x7ef00200-0x7ef0027f,0x7ef04300-0x7ef043ff,0x7ef20000-0x7ef200ff,0x7ef00100-0x7ef0012f irq 60,61,62,63,64,65 disabled compat brcm,bcm2711-hdmi0 (no driver attached) simplebus0: mem 0x7ef04500-0x7ef045ff,0x7ef00b00-0x7ef00dff disabled compat brcm,bcm2711-hdmi-i2c (no driver attached) simplebus0: mem 0x7ef05700-0x7ef059ff,0x7ef05300-0x7ef054ff,0x7ef05f00-0x7ef05f7f,0x7ef05f80-0x7ef05fff,0x7ef06b00-0x7ef06cff,0x7ef06f00-0x7ef072ff,0x7ef00280-0x7ef002ff,0x7ef09300-0x7ef093ff,0x7ef20000-0x7ef200ff,0x7ef00100-0x7ef0012f irq 66,67,68,69,70,71 disabled compat brcm,bcm2711-hdmi1 (no driver attached) simplebus0: mem 0x7ef09500-0x7ef095ff,0x7ef05b00-0x7ef05dff disabled compat brcm,bcm2711-hdmi-i2c (no driver attached) gpioc1: on gpio1 bcm2835_firmware0: compat raspberrypi,firmware-reset (no driver attached) simplebus0: compat raspberrypi,bcm2835-power (no driver attached) simplebus0: mem 0x7e00b840-0x7e00b87b irq 72 compat brcm,bcm2711-vchiq (no driver attached) sdhci_bcm0: mem 0x7e300000-0x7e3000ff irq 73 on simplebus0 sdhci_bcm0: SDHCI frequency: 250MHz sdhci_bcm0-slot0: 250MHz HS 4bits VDD: 3.3V VCCQ: 3.3V DRV: B PIO removable sdhci_bcm0-slot0: ============== REGISTER DUMP ============== sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000000 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000 sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =========================================== sdhci_bcm0-slot0: Card inserted mmc0: on sdhci_bcm0 simplebus0: mem 0x7e300000-0x7e3000ff irq 74 disabled compat brcm,bcm2835-mmc (no driver attached) simplebus0: mem 0x7e600000-0x7e6000ff irq 75 disabled compat raspberrypi,rpi-firmware-kms-2711 (no driver attached) simplebus0: mem 0x7e600000-0x7e6000ff irq 76 disabled compat brcm,bcm2835-smi (no driver attached) simplebus0: mem 0x7e800000-0x7e8007ff,0x7e802000-0x7e802003 irq 77 disabled compat brcm,bcm2835-unicam (no driver attached) simplebus0: mem 0x7e801000-0x7e8017ff,0x7e802004-0x7e802007 irq 78 disabled compat brcm,bcm2835-unicam (no driver attached) simplebus0: mem 0x7e009800-0x7e0098ff,0x7ee08000-0x7ee080ff disabled compat brcm,bcm2835-axiperf (no driver attached) simplebus0: mem 0x7e200000-0x7e200fff compat brcm,bcm2835-gpiomem (no driver attached) fb0: on simplebus0 fb0: keeping existing fb bpp of 32 fbd0 on fb0 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. VT: Replacing driver "efifb" with new "fb". fb0: 592x448(592x448@0,0) 32bpp fb0: fbswap: 1, pitch 2368, base 0x3e9f1000, screen_size 1060864 simplebus0: compat raspberrypi,bcm2835-vcsm (no driver attached) ofwbus0: disabled compat brcm,bcm2711-vc5 (no driver attached) sdhci_bcm1: mem 0x7e340000-0x7e3400ff irq 79 on simplebus1 sdhci_bcm1: SDHCI frequency: 100MHz sdhci_bcm1-slot0: 100MHz HS 8bits VDD: 3.3V 1.8V VCCQ: 3.3V DRV: BC PIO embedded sdhci_bcm1-slot0: ============== REGISTER DUMP ============== sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00001002 sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm1-slot0: Present: 0x1fff0000 | Host ctl: 0x00000000 sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x00007d07 sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm1-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000 sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm1-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm1-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm1-slot0: =========================================== sdhci_bcm1: vqmmc-supply regulator found sdhci_bcm1-slot0: Card inserted mmc1: on sdhci_bcm1 pmu0: irq 0,1,2,3 on ofwbus0 ofwbus0: no default resources for rid = 4, type = 1 cpulist0: on ofwbus0 cpu0: on cpulist0 cpu0: missing 'clock-frequency' property bcm2835_cpufreq0: on cpu0 cpu1: on cpulist0 cpu1: missing 'clock-frequency' property cpu2: on cpulist0 cpu2: missing 'clock-frequency' property cpu3: on cpulist0 cpu3: missing 'clock-frequency' property pcib0: mem 0x7d500000-0x7d50930f irq 80,81 on simplebus2 pcib0: parsing FDT for ECAM0: pcib0: PCI addr: 0xc0000000, CPU addr: 0x600000000, Size: 0x40000000 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: PCI addr: 0x0, CPU addr: 0x0, Size: 0x0 pcib0: Bus is not cache-coherent pcib0: hardware identifies as revision 0x304. pcib0: note: reported link speed is 5.0 GT/s. pci1: on pcib0 pci1: domain=0, physical bus=0 found-> vendor=0x14e4, dev=0x2711, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=0 powerspec 3 supports D0 D3 current D0 secbus=1, subbus=1 pcib1: irq 91 at device 0.0 on pci1 pcib0: rman_reserve_resource: start=0xc0000000, end=0xc00fffff, count=0x100000 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: memory decode 0xc0000000-0xc00fffff pci2: on pcib1 pcib1: allocated bus range (1-1) for rid 0 of pci2 pci2: domain=0, physical bus=1 found-> vendor=0x1106, dev=0x3483, revid=0x01 domain=0, bus=1, slot=0, func=0 class=0c-03-30, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=0 powerspec 3 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type Memory, range 64, base 0, size 12, memory disabled pcib1: slot 0 INTA is routed to irq 92 bcm_xhci0: irq 92 at device 0.0 on pci2 bcm_xhci0: note: xhci firmware not found. bcm_xhci0: note: installing xhci firmware. bcm_xhci0: note: xhci firmware detected; firmware is revision 138a1. pcib1: allocated memory range (0xc0000000-0xc0000fff) for rid 10 of bcm_xhci0 bcm_xhci0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xc0000000 bcm_xhci0: 32 bytes context size, 64-bit DMA bcm_xhci0: attempting to allocate 1 MSI vectors (4 supported) bcm_xhci0: using IRQ 93 for MSI bcm_xhci0: MSI enabled usbus0 on bcm_xhci0 bcm_xhci0: usbpf: Attached bcm_xhci0: note: switched to 32-bit DMA. pci0: on pcib0 pci0: failed to allocate bus number device_attach: pci0 attach returned 6 genet0: mem 0x7d580000-0x7d58ffff irq 82,83 on simplebus2 genet0: GENET version 5.0 phy 0x0000 miibus0: on genet0 brgphy0: PHY 1 on miibus0 brgphy0: OUI 0x18c086, model 0x000a, rev. 2 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto genet0: bpf attached genet0: Ethernet address: e4:5f:01:21:04:8b simplebus2: mem 0x7e007b00-0x7e007eff irq 84,85,86,87 compat brcm,bcm2711-dma (no driver attached) simplebus2: mem 0x7e9c0000-0x7eabffff irq 88 disabled compat generic-xhci (no driver attached) simplebus2: mem 0x7eb00000-0x7eb0ffff compat raspberrypi,rpivid-hevc-decoder (no driver attached) simplebus2: mem 0x7eb10000-0x7eb10fff irq 89 compat raspberrypi,rpivid-local-intc (no driver attached) simplebus2: mem 0x7eb20000-0x7eb2ffff compat raspberrypi,rpivid-h264-decoder (no driver attached) simplebus2: mem 0x7eb30000-0x7eb3ffff compat raspberrypi,rpivid-vp9-decoder (no driver attached) gpioled0: on ofwbus0 simplebus3: mem 0x7ec00000-0x7ec03fff,0x7ec04000-0x7ec07fff irq 90 disabled compat brcm,2711-v3d (no driver attached) ofwbus0: disabled compat regulator-fixed (no driver attached) cryptosoft0: crypto: assign cryptosoft0 driver id 0, flags 0x6000000 armv8crypto0: CPU lacks AES instructions Device configuration finished. Found SMCCC version 1.0 procfs registered Timecounters tick every 1.000 msec lo0: bpf attached vlan: initialized, using hash tables with chaining IPsec: Initialized Security Association Processing. tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384 usbus0: 5.0Gbps Super Speed USB v3.0 iicbus0: on iichb0 iic0: on iicbus0 sdhci_bcm0-slot0: Divider 313 for freq 399361 (base 250000000) mmc0: Probing bus ugen0.1: <0x1106 XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: ============== REGISTER DUMP ============== sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =========================================== sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: ============== REGISTER DUMP ============== sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =========================================== sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: ============== REGISTER DUMP ============== sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =========================================== sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: ============== REGISTER DUMP ============== sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =========================================== sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: ============== REGISTER DUMP ============== sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =========================================== sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: ============== REGISTER DUMP ============== sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =========================================== sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: ============== REGISTER DUMP ============== sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =========================================== sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: ============== REGISTER DUMP ============== sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =========================================== uhub0: 5 ports with 4 removable, self powered mmc0: SD probe: failed mmc0: MMC probe: failed mmc0: Current OCR: 0x00000000 mmc0: No compatible cards found on bus sdhci_bcm1-slot0: Divider 125 for freq 400000 (base 100000000) mmc1: Probing bus mmc1: SD probe: failed mmc1: MMC probe: failed mmc1: Current OCR: 0x00000000 mmc1: No compatible cards found on bus bcm2835_cpufreq0: Boot settings: bcm2835_cpufreq0: current ARM 600MHz, Core 200MHz, SDRAM 400MHz, Turbo OFF bcm2835_cpufreq0: max/min ARM 1500/600MHz, Core 500/200MHz, SDRAM 400/400MHz bcm2835_cpufreq0: current Core 860mV, SDRAM_C 1100mV, SDRAM_I 1100mV, SDRAM_P 1100mV bcm2835_cpufreq0: max/min Core 880/880mV, SDRAM_C 1100/1100mV, SDRAM_I 1100/1100mV, SDRAM_P 1100/1100mV bcm2835_cpufreq0: Temperature 42.8C Release APs...Trying to mount root from ufs:/dev/ufs/rootfs [rw]... done Root mount waiting for: usbus0CPU 0: ARM Cortex-A72 r0p3 affinity: 0 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> Instruction Set Attributes 0 = Instruction Set Attributes 1 = <> Processor Features 0 = Processor Features 1 = <> Memory Model Features 0 = Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> CPU 1: ARM Cortex-A72 r0p3 affinity: 1 CPU 2: ARM Cortex-A72 r0p3 affinity: 2 CPU 3: ARM Cortex-A72 r0p3 affinity: 3 regulator: shutting down unused regulators ugen0.2: at usbus0 uhub1 on uhub0 uhub1: on usbus0 Root mount waiting for: usbus0 uhub1: 4 ports with 4 removable, self powered ugen0.3: at usbus0 ukbd0 on uhub1 ukbd0: on usbus0 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000 Root mount waiting for: usbus0 ugen0.4: at usbus0 umass0 on uhub0 umass0: on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:0:0: Attached to scbus0 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0 pass0: Removable Direct Access SPC-4 SCSI device pass0: Serial Number 201506301013 pass0: 400.000MB/s transfers GEOM: new disk da0 (probe0:umass-sim0:0:0:1): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:1): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:1): Retrying command, 3 more tries remain da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Removable Direct Access SPC-4 SCSI device da0: Serial Number 201506301013 da0: 400.000MB/s transfers da0: 121942MB (249737216 512 byte sectors) da0: quirks=0x2 da0: Delete methods: pass1 at umass-sim0 bus 0 scbus0 target 0 lun 1 pass1: Removable Direct Access SPC-4 SCSI device pass1: Serial Number 201506301013 pass1: 400.000MB/s transfers (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL not supported. da1 at umass-sim0 bus 0 scbus0 target 0 lun 1 da1: Removable Direct Access SPC-4 SCSI device da1: Serial Number 201506301013 da1: 400.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da1: quirks=0x2 da1: Delete methods: GEOM: new disk da1 (da1:umass-sim0:0:0:1): PREVENT ALLOW MEDIUM REMOVAL not supported. mountroot: waiting for device /dev/ufs/rootfs... Warning: no time-of-day clock registered, system time will not be set accurately Dual Console: Serial Primary, Video Secondary start_init: trying /sbin/init lo0: link state changed to UP genet0: link state changed to DOWN genet0: link state changed to UP uhid0 on uhub1 uhid0: on usbus0 freebsd@generic:~ %